Doepfer

Hi Florian
Thanks for your response.
Your suggestions regarding a DCO or DSP based solution sound rather 
interesting ....
Well, I do not have a Nord modular myself, but besides the A-station, 
I have also used an analog Vermona Perfourmer 4-voice for this, but 
this has no PWM unfortunately. I do have four A-110's, an A-135 and 
the MCV24 so in principle I could go polyphonic with this as well, 
but somehow, I never came to do it.
I was came very close to an Rs370, but eventually I postponed it. 
A "digital" poly VCO from Doepfer in one form or another, as Shawn 
also suggested, would be really a must-buy for me.

best regards
Joost

--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@c...> wrote:
> Hi Joost
> 
>  > Currently, I am using a Novation A-station as a kind of "poly DCO
>  > bank" to feed my A-100, but I would really appreciate to have
>  > something from Doepfer,
> I have two A-110 and two A-111, so I tested once a four voice setup 
with 
> four different lowpass-filters, four linear VCAs and four ADSR. I 
found 
> that I have to adjust the A-110 very exactly, to have a satisfying 
> musical result.
> Then I replaced the four Doepfer VCOs by four Oscillators from my 
Nord 
> Modular (sent to the four outputs). This was really fine. I had the 
> indiviual sound of the different voices, but the good tuning of the 
> digital oscillators.
> 
> So I assume a digital controlled fourvoice oscillator would be the 
best 
> solution. Whether a DCO like in JX8P (programmable counter resets 
the 
> oscillating capacitor circuit), or a complete DSP solution is the 
better 
> way is a question of the costs for the development effort.
> 
> Florian