Doepfer

Just wanted to thank those that responded.  After reading your 
response Dieter it looks like the MAQ will do exactly what I need it 
to do.  When will the next run of these become available?  I think I 
read on the website that it will be in March...  Is this correct?

thanks everyone,
John

--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" 
<hardware@d...> wrote:
> Please look at the MAQ16/3 info on our web site:
> 
> For each of the 3 rows the following parameters are set separately:
> 
>     * running mode: forward/backwards/pendulum/one shot/random
>     * triggering advance to next step with external MIDI note 
trigger
> (instead of permanently running clock)
>     * first/last step
>     * clock dividing factor (i.e. separate tempo for each row)
>     * MIDI channel
> 
> I suppose that item #2 "triggering advance to next step with 
external MIDI
> note trigger (instead of permanently running clock)" is what you 
ask for.
> 
> The MAQ16/3 user's manual reads on page
> 
> "The difference between Clock controlled and Note controlled modes 
is the
> trigger for the
> advance to the next step. The Clock controlled modes are triggered 
by the
> (internal or
> external) MIDI Clock. This is the standard mode for sequencers. 
The Note
> controlled modes
> are triggered by an incoming Note event at the MIDI In. The MIDI 
channel of
> the incoming
> Note event must fit with the MIDI channel assigned to the 
corresponding
> row."
> 
> I think this will answer your question.
> 
> Best wishes
> Dieter Doepfer
> 
>