Doepfer

Yo,

 Actually the JUMPERS are for linking the left and right halves of a 
single bus board, not for the top and bottom of a G6.  However, 
there are posts there for that purpose as well. 


> > You can check it out here:
> > 
> > http://www.doepfer.de/a100_man/a100t_e.htm
> > 
> > Scroll down.

Text from link above:

"If you use the A-190 MIDI-/CV-Interface in your system, when you 
press a key on your MIDI keyboard, the gate and CV1 signals from the 
A-190 will be sent via the INT.GATE and INT.CV to all modules on the 
bus. The INT.GATE and INT.CV signal busses can be split into two 
equal halves by removing jumpers J1 and J2 (see Fig. 3), so that for 
each whole bus, you can have two separate CV/GATE subsystems.
If on the other hand you'd like to have the same internal CV and 
gate available on two busses at once, you need to link the two 
together, with the special CV/gate leads, the A-100 BC."

Cheers,

N Keller