Doepfer

I'll be interested to hear an answer to this one.  I can't think how this
can be done without more modules -- you need something counting to 24.  Of
course the new A151 has a switch allowing you to use it as a 1:3.  With the
old A151, in this configuration it seems like something that requires
another sequencer or sequential switch -- a trigger output on step 8 of
sequencer 1 clocks the second sequencer, which resets after 3 steps, multing
off the reset signal to the A151's reset input.  I don't know, maybe I'm
full of sh_t on this.  Other takers?

--Chuck

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com] On
Behalf Of trebcavxx
Sent: Friday, April 15, 2005 2:56 PM
To: Doepfer_a100@yahoogroups.com
Subject: [Doepfer_a100] Doepfer A151



I've got a question about the Doepher A151 Sequential switch. Using the 
switch in the fashion of inputting 3 CV feeds in, and taking an output 
from the I/O socket, I'd need to input a reset signal into the reset 
socket to cancel the 4th switching on each pass. Does anyone know where 
I'd get the pulse from to do this ?  
I'm feeding in three CVs from three Analogue Sol sequencers into 1,2 
and 3, then taking the output from the I/O socket to my quantiser, and 
then on to the CV input of a VCO. The switching pulse for the A151 is 
coming from the 1:8 output of my master clock. The 1:1 output goes to 
the three sequencer's CLOCK inputs, (and also to the TRIG of an 
envelope generater), giving me the full 8 channels on a sequencer, 
which then switches to the next sequencer and so on, so we have in 
effect one 24 channel sequencer, but the resetting of the A151 is 
giving me a problem.
Can anyone help please ?








 
Yahoo! Groups Links