Doepfer

I'm not the MCV24 specialist but as far as I know you have to define the low
and high gate values in the opposite way (e.g. +8V for off state and 0V for
on state). Please contact Christian Assall (software@doepfer.de) if you need
assistance.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Antonio Grazioli
> Gesendet: Samstag, 7. Mai 2005 01:17
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] RE: MCV24 and A-100
>
>
> I have a similar problem (maybe) with my MCV24.
>
>
>
> I used Out1 for CV and Out13 for Gate. The A100 plays when I release a Key
> on my MIDI keyboard.I tried everything, but nothing worked, I
> always have an
> inverted Gate signal at the output.I connected the gate signal to a A-175
> Voltage Inverter and then it plays correctly.
>
> try with the different settings in the Trigger Level ON and Trigger Level
> OFF for instance.
>
>
>
> ciao
>
>
>
> Antonio
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>