Doepfer

hello anders,

if the other a190 also fails to work, it is
probably a problem with the cs15. afaik the
yamaha can be a pain if you want to use it with
midi-cv interfaces. i had bad experiences with
a cs20m years ago, i never got it in tune and
finally sold it, which was a pitty, because
i loved the smooth filter sound, especially
the highpass.

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com, "Anders Eliasson" <anders@r...> 
wrote:
> Good point!
> 
> I've only tried one of them.
> I will try my other 190 before I do anything drastic! :-)
> 
> Anders
> 
> 
> 
> 
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, "selfoscillate" 
> <synaptic_music@y...> wrote:
> > 
> > hello anders,
> > 
> > does this problem occour with only one of your a190's
> > or on any of them?
> > 
> > best wishes
> > 
> > ingo
> > 
> > 
> > 
> > --- In Doepfer_a100@yahoogroups.com, "Anders Eliasson" 
> <anders@r...> 
> > wrote:
> > > Hello!
> > > 
> > > I'm desperately trying to control my Yamaha CS15 with one of my 
> > A190's. The
> > > gatepolarity is no problem and I've changed cv1 to Hz/v. But I 
> > can't get the
> > > scale right! It starts out finer on 125mv but then it increases 
> a 
> > lot. The
> > > second octave should be 250mv but is 270mv. I've taken down the 
> > scale to
> > > it's lowest point.
> > > 
> > > What I have now is:
> > > 
> > > 125mv	should be:(125mv)
> > > 270mv		(250mv)	
> > > 560mv		(500mv)
> > > 1,14v		(1v)
> > > 2,3v		(2v)
> > > 4,5mv		(4v)
> > > 
> > > Is it possible to trim? I noticed there's one trimpot on the 
pcb.
> > > 
> > > Anyone that had a similar problem?
> > > 
> > > Anders E
> > > 
> > > _______________________________________________________
> > > What's the difference between an extra-large pizza and a 
> composer? 
> > > The extra-large pizza can feed a family of four. 
> > > ______________________________________________
> > >  
> > > Red River AB
> > > Skolvägen 18
> > > 730 91 Riddarhyttan
> > > www.redriver.se
> > > ___________________________________________________