Doepfer

(in theory it should be something like this:)
pass the audio through a VCA with gain set to max. In parallel, pass 
the signal through a A119. Take the Env output, invert+offset it (so 
that instead of going from 0 to 5V it goes from 0 to -5V) and patch it 
into the CV in of the VCA. The CV attenuator will be the "compression 
amount". You may want to insert a slew limiter before the CV-in to get 
control over "attack" and "release" of the compressor.

*should* work, untested.

cheers,
d
Am 12.05.2005 um 16:58 schrieb selfoscillate:

> --- In Doepfer_a100@yahoogroups.com, "gargar1974" <gustaf@p...> wrote:
>  > --- In Doepfer_a100@yahoogroups.com, Florian Anwander
>  > <Florian.Anwander@c...> wrote:
>  > >Compressors can be done also with Doepfer modules, but I think it 
> is
>  > >much easier to use a simple standard compressor like alesis or
>  > >behringer.
>  >
>  > Hi Florian,
>  > Just out of curiosity,
>  > How would you set up a compressor with A-100 modules?
>  > (Not just to use with vocoder, but generally.)
>  > I suspect you need a couple of VCAs but how?
>  > /gustaf
>
>  i believe that there was a picture of the compressor patch in
>  the files section, but it seems to be not there anymore.
>  same applies to a vocoder patch that i've uploaded months ago.
>  maybe bakis has deleted them to make room for the patching contest.
>
>  by the way, please upload your patching contest files, it seems
>  that only tomek and i have contributed mp3's so far.
>
>  don't be so lazy, ya all� ;-)
>
>  best wishes
>
>  ingo
>
>
>
>
>
>
> Yahoo! Groups Links
> 	� 	To visit your group on the web, go to:
> http://groups.yahoo.com/group/Doepfer_a100/
> �
> 	� 	To unsubscribe from this group, send an email to:
> Doepfer_a100-unsubscribe@yahoogroups.com
> �
> 	� 	Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
> Service.
>


[Non-text portions of this message have been removed]