Doepfer

Hi. If you´ve been logged off for a while and happen to see this 
message, please don´t pass it by just because it´s some weeks old, 
every comment that I received so far has led to important adjustments 
in my sys-planning! 

Right now I would be very happy for some advice regarding the choice 
of filters!

For example, anyone could say something about choosing A108-filter or 
A121 Multimode fltr??? Also very uncertain about choosing A124-Wasp 
filter or A106-1Extreme filter.(?)

Thank you very much Ingo for yr help. I removed one of the a134 VC-
panning and added an a175 inverter as you suggested. One thing that I 
did NOT do, as you will see, is to add another LFO. This is because 
of my intentions of using ONE "master tempo" generated from a single 
lfo, and then reproduce (using multiples) different versions of it 
with the clock dividers, (please tell me if this isn´t realistic!). 
Then I aim to "mix" these different versions to generate a sum - 
internally synced - lfo, then send this to VCA, VC-panning and VCF. 
For this I would obviously have a lot help from the future 
model "a143-4" which still is at development stage. (no release date 
planned so far, D Doepfer replied this morning; after I had expressed 
my wishes to him in an e-mail yesterday...)

Anyway. My own logic tells me I can do these things in other ways, 
and if someone has the opposite experience, please shout out to me 
very loud!!!

I didn´t completely understand yr solutions that should make the 
second (now removed) a134 unnecessary, but of course I´m willing to 
believe you... Well,  my intention with it was to use one of them as 
a regular panning mod, and the other to experiment with, for 
instance, shifting between to filters...

Ok. Here comes the, since yesterday, updated list:

 

 

>A110 Oscillator10TE
>
>
>
>A106-1 Extreme filter/// A106-1 Extreme Filter/// A108 LP/BP filter
>
>A121 Multimode filter/// A107 Morphing Filter/// A107 Morhing filter
>
>A124 Wasp filter/// (A124 Wasp fltr)/// (A 106-1 Extreme fltr)
>
>
>
>A131 VCA 8TE
>
>A131 VCA 8TE
>
>A132 Dual VCA
>
>A132 Dual VCA
>
>A134 VC Panning 8TE
>
>A136 Distortion Waveshaper 8TE
>
>A135 VC mixer

A138A Mixer 8TE (linear) 
>
>A138c polarizing mixer (could this module replace the one above? or 
do you think I will find use for both?)
>
>A145 LFO 8TE
>
>A143-2 Quad ADSR
>
>A160 Clock divider
>
>A161 Clock sequencer
>
>A163 VC clock divider

A175 dual voltage inverter
>
>A180 Multiple 4TE
>
>A180 Multiple 4TE
>
>A190 Midi-CV10TE
>
> 1xBlind plate 2TE






>From: "selfoscillate" <synaptic_music@yahoo.com>
>Reply-To: Doepfer_a100@yahoogroups.com
>To: Doepfer_a100@yahoogroups.com
>Subject: [Doepfer_a100] Re: new memb, planning issues
>Date: Thu, 12 May 2005 07:23:12 -0000
>
>
>hello martin,
>
>i'd throw in another vco and another lfo.
>or exchange the a145 lfo with an a143/3 quad lfo,
>if you don't need the sine out and retrigger input
>of the a145.
>
>two a134 and an a135? seems to be quite unusual
>for a starter system.
>
>another module which i use a lot is the a175 inverter,
>especially because the a143/2 has no inverted outs.
>this will maybe make the second a134 obsolete, because
>you can reproduce a lot of the functionality of the a134
>with the a135 or an a132 then.
>
>please also note that the a134 can only process audio signals
>just like the a135. cv-processing is not possible with
>a134 and a135.
>
>best wishes
>
>ingo