Doepfer

I just have tried to insert the plug only half the way: The A100 CV 
as well as the pitch pot work at the same time. Thanks a lot! 
Regards, Ingo

--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@c...> wrote:
> Hi
> 
> > ??? I either find a Boss Phase(!) Shifter PS-10 or Pitch 
shifters PS-3 / 
> > PS-5 in Google. Never heard from a RPS 10?
> Whoops, must have overlooked a pile of links in Google....
> 
> >> pitch. The input seems to be normalled to the pitch pot since 
it 
> >> does't work as soon as the 'kbd controll' jack is in use. 
However, the 
> >> result is: neither the pitch pot works nor can I controll the 
device 
> >> with any CV from my A100. 
> Try to find out what voltage is sent by the pitch pot. You might 
try to 
> insert a cable not completely, so the tip of the jack has contact 
to the 
> connector inside the socket but the normalization switch is not 
touched 
> yet.
> The easy way would be to open it and measure with a voltmeter at 
the 
> center pin of the pot against 0 Volt.
> 
> Florian