Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Message

Re: [Doepfer_a100] Digest Number 1176

2005-05-20 by royce

wtb: doepfer wasp filter
email me at rrooyyccee@yahoo.com
i live in the u.s. (chicago)
royce

--- Doepfer_a100@yahoogroups.com wrote:

> ------------------------ Yahoo! Groups Sponsor
> --------------------~--> 
> Has someone you know been affected by illness or
> disease?
> Network for Good is THE place to support health
> awareness efforts!
>
http://us.click.yahoo.com/pKxVKC/UOnJAA/n1hLAA/QnLolB/TM
>
--------------------------------------------------------------------~->
> 
> 
> There are 15 messages in this issue.
> 
> Topics in this digest:
> 
>       1. Re: a196 pll patch examples
>            From: "thomasborax"
> <thomasborax@yahoo.com>
>       2. Re: a196 pll patch examples
>            From: "selfoscillate"
> <synaptic_music@yahoo.com>
>       3. Re: Hard time with MCV24 + KORG MS-20
>            From: "sahkopostiosoite"
> <roskiin@welho.com>
>       4. possible forsale - custom skb pop-up mixer
> mounted enclosure
>            From: "Julian" <julian@22host24.com>
>       5. Re: Re: Hard time with MCV24 + KORG MS-20
>            From: Kim Johnsson <kim.johnsson@ineo.fi>
>       6. Re: Hard time with MCV24 + KORG MS-20
>            From: "selfoscillate"
> <synaptic_music@yahoo.com>
>       7. A-126 Voltage Controlled Frequency Shifter
>            From: "lfosynth2000"
> <lfosynth2000@yahoo.se>
>       8. AW: Re: a196 pll patch examples
>            From: "Dieter Doepfer"
> <hardware@doepfer.de>
>       9. Re: a196 pll patch examples
>            From: "selfoscillate"
> <synaptic_music@yahoo.com>
>      10. RE: A-126 Voltage Controlled Frequency
> Shifter
>            From: "n keller" <nirokesan@hotmail.com>
>      11. Re: A-126 Voltage Controlled Frequency
> Shifter
>            From: "selfoscillate"
> <synaptic_music@yahoo.com>
>      12. Re: Re: Hard time with MCV24 + KORG MS-20
>            From: Kim Johnsson <kim.johnsson@ineo.fi>
>      13. Re: Re: Hard time with MCV24 + KORG MS-20
>            From: Florian Anwander
> <Florian.Anwander@consol.de>
>      14. Re: Re: Hard time with MCV24 + KORG MS-20
>            From: Bakis Sirros
> <synth_freak_2000@yahoo.com>
>      15. Re: Hard time with MCV24 + KORG MS-20
>            From: "selfoscillate"
> <synaptic_music@yahoo.com>
> 
> 
>
________________________________________________________________________
>
________________________________________________________________________
> 
> Message: 1         
>    Date: Tue, 17 May 2005 22:04:34 -0000
>    From: "thomasborax" <thomasborax@yahoo.com>
> Subject: Re: a196 pll patch examples
> 
> hi-
> thank you for the patch posts.  some very nice ideas
> about the PLL. 
> i have a question about example 6 however.  in this
> example you 
> state that the patch employs a "fair amount of a196
> low pass 
> filtering."  perhaps i'm not understanding the
> normalizing scheme of 
> the module. haven't you bypassed the filter entirely
> in this patch?  
> in your example 4 you say that you're using the a171
> instead of the 
> a196 built-in lpf.  in this example 4 patch you have
> phase comp out 
> going through it's processing loop then into the
> a196vco input, 
> which is also what happens in example 6...except
> that you state that 
> you're using the a196 on board filter this time.
> i guess my question is, to your knowledge, is the
> a196 normalized so 
> that the input/output jacks break the internal loop?
>  the one jack 
> that obviously does not break the loop is the vco
> out, which must 
> necessarily go to the phase comp as well as further
> down the signal 
> chain.
> 
> the reason i ask is because, although i've had some
> incredible 
> results from using my PLL, i find that it takes a
> lot of 
> experimenting to get interesting results (to me at
> least.)  perhaps 
> i could use insight into how the module is
> normalized. it's not 
> clear to me from the pdf manual.  pardon me if i'm
> being dense about 
> it. 
> -tom
> 
> --- In Doepfer_a100@yahoogroups.com, "selfoscillate"
> 
> <synaptic_music@y...> wrote:
> > 
> > hello,
> > 
> > a few quite simple a196 patch examples:
> > 
> > (sorry, this is a long post...)
> > 
> > in the following examples the same 8-note sequence
> is
> > repeated over and over (coming from an a155 +
> a156).
> > each note also generates a trigger signal (a155).
> > this trigger starts an adsr with each note, which
> > opens the final vca (a131). beware, the sound is
> > a bit harsh sometimes ;-)
> > 
> > also no live tweaking in these examples.
> > 
> > 
> > 1.
> > the first file is the pure square output of an
> a110,
> > which plays the sequence. this will be the source
> > for the a196 in all examples.
> > 
> >
>
http://www.selfoscillate.de/a100files/a196-a110source.mp3
> > filesize: 73 kb
> > 
> > patch details:
> > pitch cv  -->  a110(a) cv1 input
> > a110(a) square  -->  a131 signal in (to recorder)
> > 
> > 
> > 2.
> > next you hear the a196 vco output, when the
> > a110 squarewave is fed into input 2 of the a196.
> > 
> >
>
http://www.selfoscillate.de/a100files/a196-neutral.mp3
> > filesize: 73 kb
> > 
> > patch details:
> > pitch cv  -->  a110(a) cv1 input
> > a110(a) square  -->  a196 phase comp Input 2
> > a196 vco output  -->  a131 signal in (to recorder)
> > 
> > a196 settings:
> > offs = 5 ; range = mid ; type = 3 ; lowpass = 0
> > 
> > 
> > now, what can we do to turn this upside down?
> > 
> > 
> > 3.
> > this one uses another a110 at the a196 input 1,
> > which plays the same sequence 1 octave higher.
> > notice the variations, they are generated because
> > of a slight detune between both vco's.
> > 
> >
> http://www.selfoscillate.de/a100files/a196-spank.mp3
> > filesize: 1084 kb
> > 
> > patch details:
> > pitch cv  -->  a110(a) cv1 input
> > pitch cv  -->  a110(b) cv1 input
> > a110(a) square  -->  a196 phase comp Input 2
> > a110(b) square  -->  a196 phase comp Input 1
> > a196 vco output  -->  a131 signal in (to recorder)
> > 
> > a196 settings:
> > offs = 5 ; range = mid ; type = 3 ; lowpass = 0
> > 
> > a110(b) + 1 octave up
> > 
> > 
> > 4.
> > now the second a110 is removed from the a196 input
> 1.
> > the a196 vco output is now fed back into the
> cv-input
> > of the first a110. an a171, modulated by the
> pitch-cv,
> > replaces the built-in a196 lowpass filter. listen
> to
> > the rhythmic variations, these are all created by
> the
> 
=== message truncated ===



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Small Business - Try our new resources site!
http://smallbusiness.yahoo.com/resources/

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.