Doepfer

Enter your vote today!  A new poll has been created for the 
Doepfer_a100 group:

Would you like Doepfer to release an Analogue Shift 
Register Module? (on digital level, a shiftregister is a 
row of single Bit memory stages. A clock forwards the 
content of one stage always to the next stage, the content 
of the last stage is lost, and the first stage receives the 
new value from the input.
On the analogue level, it could work with a row of s&h-
Modules. Because the handing over from one stage to another 
stage always has to errors(noise) and voltage loss, 
assumingly a little bit other solution would be used: It is 
a bunch of S&H-Modules. With the clock the incoming voltage 
is switched from one to the next S&H, and with the same 
clock each s&h is switched to the next output.)
 

  o yes! 
  o maybe 
  o no. 


To vote, please visit the following web page:
http://groups.yahoo.com/group/Doepfer_a100/surveys?id=12051877 

Note: Please do not reply to this message. Poll votes are 
not collected via email. To vote, you must go to the Yahoo! Groups 
web site listed above.

Thanks!