Doepfer

The only solution I can see is the planned universal vactrol module. You
could use the vactrol outputs of this module to control any variable
resistor (like the Attack or Decay controls of A-143-1) with CV. This module
is still under development but we don't expect any problems as we have
collected sufficient experience with the vactrol modules A-101-x.

The universal vactrol module will be able also to make circuit bending a bit
more controllable.

Best wishes
Dieter Doepfer


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von danv_83
> Gesendet: Mittwoch, 29. Juni 2005 00:04
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: a-143-1 complex envelope, modification???
>
>
> any ideas? thanks.
>
> --- In Doepfer_a100@yahoogroups.com, "danv_83" <danv_83@y...> wrote:
> > I'm interested in adding some cv ins to the complex envelope module.
> > I'd like to be able to control the attack and decay times through cv.
> > I know real-estate is one of the hardest parts here, so I was wondering
> > if there would be a simple way to install a switch that could switch
> > the pre existing trigger input jacks to route to control attack and
> > decay times. any suggestion very appreciated.
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>