Doepfer

Hi

I think there is no "wrong" or "right" range. The P6 is an offset, which 
can be set arbitrarily.

I assume there is a standard setting by the production at Doepfer, but 
if you have bought the VCOs from any other person but a official 
distributor he might have changed those settings.

Florian

analog1k wrote:

> Thanks for that Florian.
> 
> However I think my range is still off...
> 
> This what my VCO's are now tuned to:
> 0  = note C3
> -1 = note C2
> -2 = note C1
> 
> +1 = note C4
> +2 = note C5
> 
> according the a110 adjustment procedure that
> the above is wrong, it should be:
> 
> -2 = note C3
> -1 = note C2
> 0  = note C1
> +1 = note C
> +2 = note c
> 
> Which range is right, mine or the a110 tech notes?
> 
> Cheers. 
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, Florian Anwander 
> <Florian.Anwander@c...> wrote:
> 
>>Hi
>>
>><snipped>
>>
>>>>The full set-up procedure is in the A-110 Service Manual, which 
> 
> is 
> 
>>>>available at the Doepfer website (there's a link on the A-110 
> 
> page).
> 
> 
>>Then you heave to bring it to a shop, who gives service for Doepfer.
>>
>>Best regards, Florian
> 
> 
> 
> 
> 
> 
>  
> Yahoo! Groups Links
> 
> 
> 
>  
> 
> 
> 

-- 
Florian Anwander                  |ConSol
Tel.   +49(89)45841-133           |Consulting&Solutions Software GmbH
Fax    +49(89)45841-111           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de