The SSM Chip is a SSM2164, A VCA Chip for 4 exponential VCA's. Pretty high quality. Doepfer could also just them for morphing or switching or to control the CV-Resonance. --- In Doepfer_a100@yahoogroups.com, "Tim Stinchcombe" <timothy@t...> wrote: > --- In Doepfer_a100@yahoogroups.com, "waveform100" <googol@g...> > wrote: > > I have the impression that the Morphing Filters VCA is pretty nice > and > > clean. I found a good (and expensive) VCA SSM-Chip on the PCB, but > I > > have no idea if thats for the VCA or for the complex filter, > without > > following the trace. > > > > So, what IC did Doepfer use on that VCA? > > I don't have that module, but the manual says the "filter design is > 100% analog (CEM chips)", so the SSM chip *may* be to do with the > VCA, as there are several dedicated SSM VCA chips. Adding > complication is that there are dedicated SSM filter chips, e.g. > SSM2044; and there also VCA chips, e.g. SSM2164, which could be used > either to make filters, or be used in the switching between the > filters. Which SSM chip is it exactly? If you tell us the actual chip > type, or indeed a complete list of chips in the module (perhaps off- > list), it would be easier to identify their likely functions! > > Tim
Message
Re: About the VCA inside the Morphing Filter
2005-08-20 by waveform100
Attachments
- No local attachments were found for this message.