Doepfer

We definitely do not send unasked emails (you may ask the members of this
group) ! Probably someone has a virus that tells you that we are the sender.
But such emails are not from us !

Best regards
Dieter Doepfer
Doepfer Musikelektronik GmbH
Email address: hardware@doepfer.de
Web Site: www.doepfer.com


> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von David Marino
> Gesendet: Donnerstag, 15. September 2005 02:35
> An: Doepfer_a100@yahoogroups.com
> Betreff: Re: [Doepfer_a100] RE: bananalogue VCS
>
>
> can every one frome doepfer stop e-mailing me!
>
> Bryan E Cornell <bcor@loc.gov> wrote:I wonder if you can get a
> panel blank for this gap.  My Doepfer portable case has two very
> small blanks on the left side (they appear to be about 1hp each).
>  I'd contact Analogue Haven.
>
> Bryan
>
> >>> david.salter@reuters.com 09/14/05 3:06 AM >>>
> Hi Seth,
>
> Attached is link to the picture (bit fuzzy, sorry) showing the VCS
> mounted into a Doepfer G6.
>
> http://img1.yoxio.com/img/197630.jpg
>
> As you can see there is a gap of just under 1HP. Because I'd removed two
> modules to install the VCS my natural assumption was that the VCS's
> mounting holes were out. On closer inspection you should be able to make
> out that the lower mounting rails on my G6 are slightly off.
>
> Sincere apologies for the scare but I can confirm (because I did try
> moving the module to the upper level) that the VCS mounts fine.
>
> BTW a great module. Followed some suggestions from Ingo and the Serge
> Gold Guide and have now got the VCS working as a VC LFO, VCF, VC
> Envelope and VCO. More to experiment with.
>
> Many thanks
>
> David
>
> David Salter
> Senior Project Manager
> Reuters Ltd
> Tel       +44 20 7542 2402
> Mob     +44 7990562402
> email    david.salter@reuters.com
> RM       david.salter.reuters@reuters.net
>
>
> -----Original Message-----
> From: info@bananalogue.com [mailto:info@bananalogue.com]
> Sent: 12 September 2005 18:38
> To: David Salter
> Subject: RE: bananalogue VCS
>
> hi david,
>
> just wanted to write a quick note to ask you if you could please send me
> a digital photo of what your modules looks like mounted?  im concerned
> about the space you mention.  we tested mounting the modules in a
> doepfer super-case, but if there is a mounting hole desprepency i need
> to take measures to fix that.  thanks!  ill write again later with some
> more comments and suggestions for using the VCS module!
>
> best wishes!
> seth nemec
>
>
>
> > Hi Seth,
> >
> > My module has arrived, many thanks.
> >
> > I want to give you some feedback first as I'll be posting something
> > onto the Doepfer forum as well.
> >
> > Speed of service and communications have been excellent. I made my
> > first enquiry at the end of July and received my module 6 weeks later.
>
> > So no complaints there.
> >
> > First impressions. Excellent packing containing a very nice looking
> > module, ribbon cable (too short for my custom rack but long enough for
>
> > a G6), mounting screws (always nice to see) and a two page information
>
> > pack.
> >
> > I had to remove a couple of modules to try it out so it went into the
> > bottom left corner of a Doepfer G6 rack. The info pack has a clear
> > diagram to ensure that the ribbon goes correctly. Comment number 1;
> > the mounting holes do not conform to either the Doepfer or Analogue
> > Systems spec which means I have a gap either side of the module. Not a
>
> > big deal but does affect the appearance.
> >
> > The info pack has a labelled panel drawing (as per website) and the
> > connection details. Comment 2; I would really have appreciated a
> > manual of some kind. Although I've had my Doepfer Analogue Sys. System
>
> > for a while I have no experience with Serge kit and some starting
> > suggestions would have been useful.
> >
> > Started off by injecting a ramp wave in and listening. Played with the
>
> > various controls and started getting some nice sync type tones. Added
> > a single LFO to modulate each of the CV's and then both CV's (love the
>
> > pull for expo curve on these pots) again some really interesting tone.
> >
> > A hour later and I have not tried using it beyond this type of
> > function, would appreciate some guidance, but a very happy man so far.
> >
> > With luck Bananalogue will produce more Serge based modules? I do hope
>
> > so.
> >
> > Best wishes
> >
> > David
> >
> >
> >
> > David Salter
> > Senior Project Manager
> > Reuters Ltd
> > Tel       +44 20 7542 2402
> > Mob     +44 7990562402
> > email    david.salter@reuters.com
> > RM       david.salter.reuters@reuters.net
> >
> >
> > -----Original Message-----
> > From: info@bananalogue.com [mailto:info@bananalogue.com]
> > Sent: 01 September 2005 22:26
> > To: list@bananalogue.com
> > Subject: [spam] bananalogue list and news!
> >
> > hello!
> >
> > you are recieving this message because you have either ordered a
> > bananalogue VCS module, or expressed interest in the past.  i created
> > the list as an efficient means to send genreal news updates.  if you
> > would like to be removed from the list, or would like to subscribe at
> > a different email address, please email me:  info@bananalogue.com
> >
> > now the first news update!
> >
> > VCS modules are shipping as we test and pack them.  some of you should
>
> > find your module in the mail this week or next.
> >
> > we will also be taking orders for the second run of doepfer-sized
> > modules in the very near future.  if you are on the waiting list, you
> > will be contacted about payment before we open up the ordering process
>
> > to the general public.
> >
> > also, the VCS will be made availible in a limited number of frac-rack
> > modules sometime in september.  i will send out another message to the
>
> > list when they are ready.
> >
> > thats it for now - as always, please email me if you have any
> > questions or concerns.  thanks!
> >
> > seth nemec
> > info@bananalogue.com
> >
> > www.bananalogue.com
> >
> >
> >
> >
> >
> > -----------------------------------------------------------------
> >         Visit our Internet site at http://www.reuters.com
> >
> > To find out more about Reuters Products and Services visit
> > http://www.reuters.com/productinfo
> >
> > Any views expressed in this message are those of  the  individual
> > sender,  except  where  the sender specifically states them to be the
> > views of Reuters Ltd.
> >
> >
> >
>
>
>
>
>
> -----------------------------------------------------------------
>         Visit our Internet site at http://www.reuters.com
>
> To find out more about Reuters Products and Services visit
> http://www.reuters.com/productinfo
>
> Any views expressed in this message are those of  the  individual
> sender,  except  where  the sender specifically states them to be
> the views of Reuters Ltd.
>
>
>
> SPONSORED LINKS
> A100 Modular system Synthesizer Electronic payment Electronic
> test equipment Guitar synthesizer
> YAHOO! GROUPS LINKS
>
> Visit your group "Doepfer_a100" on the web.
>    To unsubscribe from this group, send an email to:
> Doepfer_a100-unsubscribe@yahoogroups.com
>    Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
>
>
>
> SPONSORED LINKS
> A100 Modular system Synthesizer Electronic payment Electronic
> test equipment Guitar synthesizer
>
> ---------------------------------
> YAHOO! GROUPS LINKS
>
>
>     Visit your group "Doepfer_a100" on the web.
>
>     To unsubscribe from this group, send an email to:
>  Doepfer_a100-unsubscribe@yahoogroups.com
>
>     Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
>
>
> ---------------------------------
>
>
>
>
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam protection around
> http://mail.yahoo.com
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>