Doepfer

the benefit of having an 1v/oct response is also that it
is easier to set up an external filter for the bbd, if
you want to get rid of the clock noise.
i don't know what i'd prefer for the bbd, i'm fine with
both solutions. but it is for sure important that the
digital delay will be 1v/oct for karplus-strong synthesis.

best wishes

ingo



--- In Doepfer_a100@yahoogroups.com, David Salter <david.salter@r...> 
wrote:
>
> I would definitely prefer the internal VCO to be 1V/oct. There's 
nothing to stop the unit having an external clk input and use 
whatever is available for the more experimental sounds.
>  
> I suppose it's also possible to do it the other way round, use an 
existing VCO and the external source??????
>  
> David Salter
> Senior Project Manager
> Reuters Ltd
> Tel       +44 20 7542 2402
> Mob     +44 7990562402
> email    david.salter@r...
> RM       david.salter.reuters@r...
>  
>  
> 
> ________________________________
> 
> From: Doepfer_a100@yahoogroups.com 
[mailto:Doepfer_a100@yahoogroups.com] On Behalf Of denis goekdag
> Sent: 14 October 2005 14:20
> To: Doepfer_a100@yahoogroups.com
> Subject: Re: [Doepfer_a100] more BBD info from doepfer!
> 
> 
> if i remember correctly, at the musikmesse Dieter spoke about a 
> karplus-strong module, so i think there will be one additionally to 
the 
> bbd-delay. if so, i would definitely prefer a wide-range, non-exact 
> 1v/oct control....for complete and utter destruction of sound :-)
> 
> looking forward to the bbd very much.
> ##
> cheers,
> denis
> Am 14.10.2005 um 13:43 schrieb Florian Anwander:
> 
> > Hi Anton
> >
> >  >>Exact 1V/Oct is a MUST!
> >  > Personally speaking I like the idea of no range switch, it's 
> > probably better for
> >  > insane multitap-like fx? Just speculating...
> >  The best would be a separate Control-Clock-VCO. But it would be
> >  assumingly too expensive to produce two modules with half the 
amount 
> > of
> >  sales for each (and also separating the BBD from the ClockVCO 
might
> >  cause problems)
> >
> >  Perhaps Dieter might do a construction, where one can switch 
between
> >  exact 1V/Oct control and a more rough "wide range control". But 
I fear
> >  these are two different types of circuits.
> >
> >
> >  > by the way: 1v/oct is nowadays called one Moog by some people, 
see
> >  > http://en.wikipedia.org/wiki/Moog under "proposed unit of 
measure"
> >  very nice idea :-)
> >
> >  Florian
> >
> >
> > SPONSORED LINKS
> > A100
> > Modular system
> > Synthesizer
> > Electronic payment
> > Electronic test equipment
> > Guitar synthesizer
> >
> > YAHOO! GROUPS LINKS
> >
> >       ▪        Visit your group "Doepfer_a100" on the web.
> >  
> >       ▪        To unsubscribe from this group, send an email to:
> >  Doepfer_a100-unsubscribe@yahoogroups.com
> >  
> >       ▪        Your use of Yahoo! Groups is subject to the 
Yahoo! Terms of 
> > Service.
> >
> >
> 
> 
> [Non-text portions of this message have been removed]
> 
> 
> 
> ________________________________
> 
> YAHOO! GROUPS LINKS 
> 
> 
> 	
> *	 Visit your group "Doepfer_a100 
<http://groups.yahoo.com/group/Doepfer_a100> " on the web.
> 	  
> *	 To unsubscribe from this group, send an email to:
> 	 Doepfer_a100-unsubscribe@yahoogroups.com 
<mailto:Doepfer_a100-unsubscribe@yahoogroups.com?subject=Unsubscribe> 
> 	  
> *	 Your use of Yahoo! Groups is subject to the Yahoo! Terms of 
Service <http://docs.yahoo.com/info/terms/> . 
> 
> 
> ________________________________
> 
> 
> 
> 
> -----------------------------------------------------------------
>         Visit our Internet site at http://www.reuters.com
> 
> To find out more about Reuters Products and Services visit 
http://www.reuters.com/productinfo 
> 
> Any views expressed in this message are those of  the  individual
> sender,  except  where  the sender specifically states them to be
> the views of Reuters Ltd.
> 
> 
> 
> [Non-text portions of this message have been removed]
>