Doepfer

Enter your vote today!  A new poll has been created for the 
Doepfer_a100 group:

Should Doepfer manufacture a single module similar to the
prototype shown on the doepfer's website BBD A188-1 page 
with 2048 or 1024 stages BBD (can be chosen by the customer
in his order). The pc board will be designed for both types
which are unfortunately not compatible.
Or, do you prefer a double module with both BBDs on the 
module. Both solutions have advantages and disadvantages.
The main advantage of the single module is the lower price.
But one would need two of these modules to have both time 
ranges available (down to 7ms or 2,5ms resp.). The 
advantage of the dual module would be the lower price if 
both time ranges are required simultaneously (compared to
two single modules), and the mixing possibilities of both
BBD sections. But the lower price is attainable only if the
module contains only one HSVCO for both BBDs. Otherwise the 
price of the double module will be nearly the same as for 
two single modules.
 

  o Double module 
  o Single module 


To vote, please visit the following web page:
http://groups.yahoo.com/group/Doepfer_a100/surveys?id=12195201 

Note: Please do not reply to this message. Poll votes are 
not collected via email. To vote, you must go to the Yahoo! Groups 
web site listed above.

Thanks!