Doepfer

Oooops, I was *totally* wrong about the mA. Sorry! Just checked the 
Doepfer HP -> FAQ where you find the following values:
Old PSU 650mA = 125mA at 230V mains voltage (250mA at 115V)
PSU 1200mA = 250mA at 230V (500mA at 115V).
Fuse type: time lag (slow blow), "traege" in German.

Since my "personal adviser" (he's both a trained electrician and a 
sound engineer) recommended me much higher values for my PSUs I'm 
puzzled and out... Stick to the quoted FAQ info, don't ask me 
anything further on PSU-issues, have a nice sunday, don't hold me 
responsible for anything I'm doing or saying... ;)
Again sorry for misleading. Take care, Ingo


--- In Doepfer_a100@yahoogroups.com, tkrakowiak <traktorman@g...> 
wrote:
>
> >Isn't it you who bridges blown fuses with conducting candy papers?
> >Glad to hear that you've changed your approch! :)
> 
> hehe, but where do you buy a fuse on saturday night ,north of 
40 ;)?
> 
> 
> >Don't know how much current your modules draw but since the old 
PSU
> >supplies 650mA and the PSU2 1200mA you should get fuses which
> >correspond to the PSU: 0.65A or 1.2A or *slightly* higher. 
Regards,
> would you say 1.5A is a good option? thanks for your answer.
> cheers
> t
> 
> 
> [Non-text portions of this message have been removed]
>