Doepfer

hello dieter,

with the right amount of jacks this module would close a real gap
in the a100 module range. what i always wanted is a buffered
version of an a180 and a precision adder could be used that
way too, if it had enough jacks.

how about three inputs, four buffered outputs and one
inverted output? could be done on a 4 te faceplate.
if you manufacture a module with similar specs, then
i'll buy a minimum of six modules for my system right away.

best wishes

ingo




--- In Doepfer_a100@yahoogroups.com, "Dieter Doepfer" <hardware@d...> 
wrote:
>
> An precision adder is from the technical point of view no problem 
(nothing
> but the CV mixer on the DIY page but without attenuators and 
precision 0.1%
> resistors and high quality OpAmps). If there are sufficient 
inquiries we
> could develop such a module. How about a poll ?
> 
> Best wishes
> Dieter Doepfer
> 
> > -----Ursprüngliche Nachricht-----
> > Von: Doepfer_a100@yahoogroups.com
> > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von okiikahuna
> > Gesendet: Samstag, 17. Dezember 2005 23:16
> > An: Doepfer_a100@yahoogroups.com
> > Betreff: [Doepfer_a100] Re: high precision adder?
> >
> >
> > Ingo,
> >
> > I think that this is an absolute necessity. It could also serve 
as a
> > buffer, since the CV output of some modules, like the midi to CV
> > module, drops if fed into too many oscilators and filters and 
such.
> >
> > There are not a lot of good alternatives out there: Analogue
> > Solutions makes an 8hp CV mixer that is completely unusable for 
this
> > purpose because it is WAY too imprecise. (don't bother trying it, 
I
> > already have)  The Analogue Systems Buffer is much more precise, 
but
> > you can't mix more than one voltage.   The Doepfer Buss Access 
mixes
> > and buffer, but still not enough inputs.  So, there is a real need
> > for this.
> >
> > It could be made as a 4hp module, since all you would need are
> > inputs and outputs. (don't need precision if you are gonna screw 
it
> > up with pots anyway) An inverting output might be nice.
> >
> > K
> >
> >
> > --- In Doepfer_a100@yahoogroups.com, "selfoscillate"
> > <synaptic_music@y...> wrote:
> > >
> > >
> > > hello list,
> > >
> > > what would you guys think about a high precision adder/mixer?
> > > such a module is very useful for adding pitch voltages
> > > for vco's. standard mixers are just not precise enough
> > > and so they often screw a 1v/oct quantized voltage.
> > >
> > > best wishes
> > >
> > > ingo
> > >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>