Doepfer

hi dugg,
i don't think that this will help because the problem
is that the triggers from the a155 are from 0 to
+12volts and that's the problem(gates are from 0 to +5
volts)...but i think attenuating them with the a129/3
will be the solution...
synthfreak

--- duffnuff <duffnuff@hotmail.com> wrote:
> --- In Doepfer_a100@y..., bakis Sirros
> <synth_freak_2000@y...> 
> wrote:
> > no,RM,
> > i mean that,if i connect one of the triggers
> output of
> > my a155 to the i/o jacks of the a150 ,that they
> pass
> > right thru the switch...not in the CV jack.
> > bakis.
> 
> 
> bakis, 
> i dont have a 150 to see what you mean..but if you
> have a 162 
> does that help?  (maybe this has already been
> suggested) i use 
> the 162 on the 155 trigs to turn them into gate
> signals when 
> necessary.  set delay time to '0' and vary the
> length to set gate 
> time. 
> duff
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com