Doepfer

hello ingo,
yes, i thought so...
but i do not have a voyager, so, i can only help in
the vca "section" of the problem.
best regards,
bakis.






--- selfoscillate <synaptic_music@yahoo.com> wrote:

> 
> damn, i have overlooked the missing vca.
> however, there was an issue with the gate signals
> coming from the voyager, so i mixed it up.
> 
> best wishes
> 
> ingo
> 
> 
> 
> --- In Doepfer_a100@yahoogroups.com, Bakis Sirros 
> <synth_freak_2000@y...> wrote:
> >
> > hello ingo, moogy,
> > no. the problem is that moogy does not have a vca
> > patched after his vco.
> > so, moogy, here's what connections you need for a
> > basic synth patch:
> > voyager cv out-> a185 cv in(from there the cv
> signal
> > is internaly distributed, via the system bus, to
> the
> > doepfer a110 vco's, no more connections to the
> a110's
> > needed)
> > 
> > voyager gate out-> a185 gate in(from there the
> gate
> > signal is internally distributed, via the system
> bus,
> > to the a140 envelopes, no more connections to the
> > a140's needed)
> > 
> > a110 audio out-> vcf audio in
> > vcf audio out->vca audio in.
> > vca audio out-> your mixing console.
> > a140 cv output-> vca cv input(for controlling the
> > volume of your synth sound)
> > a140 cv output->vcf cv input(for controlling the
> > timbre/brilliance of the sound)
> > so, now everything should work fine.
> > and do get a book about modular synthesis. it is
> the
> > only way to really apreciate the value of your
> modular
> > system.
> > best regards,
> > bakis.
> > 
> > 
> > 
> > 
> > 
> > --- selfoscillate <synaptic_music@y...> wrote:
> > 
> > > 
> > > hello,
> > > 
> > > i think the problem is the gate setting on the
> > > voyager.
> > > i don't have a voyager in the studio regularly,
> but
> > > from time to time i use one and i remember that
> i
> > > had similar
> > > problems with the gate and i just had to change
> a
> > > single
> > > setting on the yoyager and it worked, but i
> cannot
> > > recall
> > > which setting it was.
> > > 
> > > best wishes
> > > 
> > > ingo
> > > 
> > > 
> > > 
> > > --- In Doepfer_a100@yahoogroups.com, "moogy"
> > > <moogy9918@y...> wrote:
> > > >
> > > > 
> > > > Hi Everyone,
> > > > 
> > > > Firstly here is a list of modules in my new
> > > system,
> > > > 
> > > > G6 case
> > > > A-185 bus access
> > > > A-102 diode filter
> > > > A-118 noise source
> > > > 3xA-140 ADSR
> > > > 2xA-146 LFO
> > > > A-160 clock divider
> > > > A-161 clock sequencer
> > > > 2x A-180 multiples
> > > > A-138 mixer
> > > > A-108 VCF
> > > > A-179 LCV
> > > > A-119 external in
> > > > A-114 ring mod
> > > > 2x A-110 VCO
> > > > A-131 VCA
> > > > A-137 VC wave multiplier
> > > > A-199 spring reverb
> > > > 
> > > > I'm using an MCV-4 being triggered by a
> Voyager.
> > > > 
> > > > Here's my problem,
> > > > 
> > > > I have the gate connection from the MCV4 going
> to
> > > 'gate in' on the 
> > > > bus access and CV1/2 fom the MCV into 'CV in'
> on
> > > the bus access.
> > > > 'Gate Out' from bus access goes to 'Gate In'
> on
> > > the ADSR.Output 
> > > from 
> > > > the ADSR goes to 'CV1' on a VCO.Sawtooth
> output
> > > from the VCO goes 
> > > to 
> > > > output on the mixer.
> > > > Under these conditions I'm getting a
> continously
> > > sustained note.The 
> > > > Voyager is articulating notes from the VCO and
> the
> > > ADSR is 
> > > triggered 
> > > > and produces an envelope but once the envelope
> > > cycle finishes the 
> > > > system produces a sustaining note.If I remove
> the
> > > ADSR to VCO CV1 
> > > > connection the system will still articulates
> notes
> > > from the Voyager 
> > > > but still returns to a sustaining note.
> > > > 
> > > > I've tried various set ups but still can't get
> rid
> > > of the sutaining 
> > > > note...hope my description is clear enough,can
> > > anyone please help,
> > > > 
> > > > thanks,
> > > > 
> > > > terry.
> > > >
> > > 
> > > 
> > > 
> > > 
> > > 
> > 
> > 
> > Bakis Sirros - Parallel Worlds
> > [Doepfer_a100] group owner
> > http://www.parallel-worlds-music.com
> > http://www.shimarecords.co.uk
> > http://www.rubber.gr
> > Athens-Greece
> > 
> > 
> > 		
> > __________________________________________ 
> > Yahoo! DSL – Something to write home about. 
> > Just $16.99/mo. or less. 
> > dsl.yahoo.com
> >
> 
> 
> 
> 
> 


Bakis Sirros - Parallel Worlds
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece

__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com