Doepfer

Thanks a lot.
So it was a product idea, what do you say about it? would you try it out?
I have module name to suggest; A134b VC sourcswap - (after a product 
decribed by legendary Martin in a letter to the intertech bulletin early 
2006)

he he

/m





>From: "selfoscillate" <synaptic_music@yahoo.com>
>Reply-To: Doepfer_a100@yahoogroups.com
>To: Doepfer_a100@yahoogroups.com
>Subject: [Doepfer_a100] Re: VC-panning tech question
>Date: Thu, 19 Jan 2006 13:47:50 -0000
>
>
>hello martin,
>
>if i understand right, then you need two a134 panners and
>two a180 multiples for this task.
>
>feed the two signals to be swapped to both a134 (via a180).
>the output mix of one a134 is the left channel output, while
>the mix output on the second a134 is the right channel output.
>maybe you need another multiple for distributing the
>panning cv to both a134.
>
>this seems to be the easiest way to accomplish your task.
>
>best wishes
>
>ingo
>
>
>--- In Doepfer_a100@yahoogroups.com, "Martin Rudling"
><martinrudling@h...> wrote:
> >
> >
> > Hello again.
> > I´m very close to finishing my order to touched-by-sound online-
>store.
> > Right now it seems like I will go for 101-2 steinergate and 124
>wasp. (no
> > I´m not buying any lfo:s this time around, hoping for the 143-4 to
>show up)
> >
> > I have some troubles understanding the  VC-panning module, though.
>I can´t
> > figure out if it does what I want it to, which is the following: I
>want it
> > to be a channel X-fade- swapper, which is NOT regular panning. I
>want it to
> > crossfade/switch 2 audio inputs to proportionally appear at both
>outputs. So
> > what I want is in other words a dual-panner with inverted CV-phase
> > relations, no output ever gets "un-feeded", just the source
>is "swapped". I
> > a mid-point the signals are just in a regular mix appearing at both
>left and
> > right outputs.
> > Purpose: Switching between two different pre-filters to be post-
>processed by
> > stereo-filtering/processing.
> >
> > And what I don´t understand is if A-134 can manage this or if, what
>I just
> > described is a product idea. I do understand that this swap-effect
>can
> > easily be realized with some other modules, like a combination of
>the dual
> > voltage inverter and a couple of VC mixers, or with two A-134:s...
>but isn´t
> > this purpose very common in A-100 modulation? I suppose I´m not
>alone
> > thinking stereo...
> > And if the swapping module IS a product idea it would very easy to
>produce.
> > If so, a manual input gain control of the input levels would also
>be nice to
> > adjust the "mix".
> >
> > /Martin
> >
>
>
>
>