Doepfer

Hello Martin! Why this hurry? It might be turn out cheaper in the 
end to take one more day and phone The Synthesizer Netwerk in 
Goteborg tomorrow. They are the Swedish Doepfer representive (see 
below).
Wether you need a G3 or G6 frame (Grundrahmen) depends on your 
alternatives. Since you suggest that you don't feel like 
constructing your own frame and do the electric part on your own: 
Yes, a G3 or a G6 is the way to go. BTW I doubt that Doepfer makes 
large profits on them. Any other way in order to save money will 
need some DIY skill on the electronical and mechanical site.
Hope that helps, Ingo


The Synthesizer Network
Träkilsgatan 87
41468 Goteborg
Phone: 706 - 647474
www.analogue.org/network
morgan@analogue.org

--- In Doepfer_a100@yahoogroups.com, "Martin Rudling" 
<martinrudling@h...> wrote:
>
> 
> As you can see I´m helplessly non-technichally orientated, and 
very naive.
> If there only was someone who spoke swedish to call...! Andreas! 
If you see 
> this today please contact me! By mail or 070 408 7441.
> 
> I´m at an internet center trying to concentrate with about 40 
> school-children around me shouting at 
eachother: "Shooot!!!" ....playing 
> computergames. I might just go for that Grundrahmen 300 EURos and 
think of 
> all the electricity I wouldn´t like to have injected through my 
clumsy 
> veins.. and also; I might want to bring the system somewhere... 
puuh.
> 
> Do you think that the G3 grundrahmen is a good choice??
> 
> 
> 
> >From: "Martin Rudling" <martinrudling@h...>
> >Reply-To: Doepfer_a100@yahoogroups.com
> >To: Doepfer_a100@yahoogroups.com
> >Subject: Re: [Doepfer_a100] Instant advice needed!!!
> >Date: Thu, 19 Jan 2006 18:35:01 +0100
> >
> >Yeah I suppose I do...
> >
> >Right now my order contains:
> >
> >A101-1 Vactrol steiner multitype filter   (switched to this from 
it´s 
> >little
> >brother 101-2 five mins ago - still ambivalent...)
> >
> >A124 waspfilter
> >
> >2 X A134 vc-panning
> >
> >2 X ;Multiples
> >
> >Kenton pro solo mkII - midi-cv interface
> >
> >1 blind plate (a100 b2)          It seems like I need this, but 
what about
> >"Netzteil"???
> >
> >
> >Please keep in mind that I´m a poor man. The "100 G3 Grundrahmen" 
would 
> >ruin
> >me!
> >
> >Cables you can recommend?
> >
> >
>