Doepfer

apologies for the original double post.

Florian,

Thanks for the slap.  I suppose I've seen this mentioned loads of times I 
just never understood what the simple circuit was doing.  Still not 100% 
sure.......guessing that the gate "opens" the transistor, allowing the TIP 
of the jack to connect to ground.  Seems obvious now.

  I will set to work on an interface right away, well...... Friday.  I hope 
anyone else with a Vortex will try something similar.  I will soon have CV 
control of one parameter at a time , syncable echoes, and triggered morph.   
Now I want to make a module that will output only 2 triggers from the master 
clock (or division thereof) at the push of a button for setting the TAP 
TEMPO remotely.

  Thanks again.

n keller






>From: Florian Anwander <Florian.Anwander@consol.de>
>Reply-To: Doepfer_a100@yahoogroups.com
>To: Doepfer_a100@yahoogroups.com
>Subject: Re: [Doepfer_a100] ??? Interfacing VORTEX w/ A-100
>Date: Wed, 25 Jan 2006 09:51:20 +0100
>
>Hi
>
> >   My question is how can I create a voltage-controlled, momentary 
>"switch to
> > ground", so that I can activate a footswitch function with a GATE or 
>TRIG
> > from A-100/MAQ16-3/MCV24???
>Check http://www.doepfer.de/faq/gen_faq.htm#S-Trig
>
>I built such a adaptor to control the Arpeggio trigger of my Korg
>MonoPoly. Also my Moog Prodigy works fine with it.
>
>If you don't want to solder your self, then await the A-101-9. It should
>   work also fine as Gate to S-Trigger converter
>
>Florian
>

_________________________________________________________________
Don�t just search. Find. Check out the new MSN Search! 
http://search.msn.click-url.com/go/onm00200636ave/direct/01/