Doepfer

hi duff,
thanks for your measures...i don't have a voltometer
so i beleive the values that you measured arer
correct.so,triggers(7-8volts)are a mystery...why won't
they work with the a150???the gate i have tested comes
from the kenton pro-2000 and it's 0 to +5volts,so,it's
expected to work o.k.,with the a150......more tests
need to be done...
synthfreak


--- duffnuff <duffnuff@hotmail.com> wrote:
> bakis, 
> hmm, your comment prompted me to measure these
> voltages.  to my 
> surprise, here are the results: (i'm sure there's
> some variance from one 
> module to the next as well)
> 
> A155 triggers send 7-8v and the GATE sends 10v
> A162 TRIG output is 10v
> A177 foot controller GATE output is 12v (!!)
> A178 theremin gate output is  8v, 
> A190 gate output is 10 v.
> and just to make sure i'm not hallucinating, a 9v
> battery reads output of 9v.
> 
> so i don't know what's up w these reported specs..
> 
> the A129/3 must have slipped by me somehow, never
> realized the potential of 
> this module outside a vocoder system, and i now see
> it as a necessity.  yikes!
> duff
> 
> 
> 
> -- In Doepfer_a100@y..., bakis Sirros
> <synth_freak_2000@y...> wrote:
> > hi dugg,
> > i don't think that this will help because the
> problem
> > is that the triggers from the a155 are from 0 to
> > +12volts and that's the problem(gates are from 0
> to +5
> > volts)...but i think attenuating them with the
> a129/3
> > will be the solution...
> > synthfreak
> > 
> > --- duffnuff <duffnuff@h...> wrote:
> > > --- In Doepfer_a100@y..., bakis Sirros
> > > <synth_freak_2000@y...> 
> > > wrote:
> > > > no,RM,
> > > > i mean that,if i connect one of the triggers
> > > output of
> > > > my a155 to the i/o jacks of the a150 ,that
> they
> > > pass
> > > > right thru the switch...not in the CV jack.
> > > > bakis.
> > > 
> > > 
> > > bakis, 
> > > i dont have a 150 to see what you mean..but if
> you
> > > have a 162 
> > > does that help?  (maybe this has already been
> > > suggested) i use 
> > > the 162 on the 155 trigs to turn them into gate
> > > signals when 
> > > necessary.  set delay time to '0' and vary the
> > > length to set gate 
> > > time. 
> > > duff
> > > 
> > > 
> > 
> > 
> > =====
> > synthfreak(parallel worlds)
> > athens-greece
> > [Doepfer_a100] group owner-moderator
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Yahoo! Greetings - Send FREE e-cards for every
> occasion!
> > http://greetings.yahoo.com
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com