Doepfer

-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of Florian Anwander
Sent: Sunday, January 29, 2006 11:57 PM
To: Doepfer_a100@yahoogroups.com
Subject: Re: [Doepfer_a100] Dumb question/ stuck screw in a-100


Hi Gene

The

Gene Schwartz wrote:
> I purchased a used case of a-100 modules to supplement my existing 
> system. The only problem is that one of the screws for the a-155 
> sequencer module is totally stuck. This wouldn't concern me so much 
> except I might be buying a second a-155, and would need to remove it 
> temporarily to make the proper connections.
> 
> It was suggested that I try a pair of pliers to try to get it out, but

> all I suceeded in doing was scratching the surface ):
stick adhesive tape around the screw, to protect the surface of the 
module. (This are the things one learns after the first try)

> I am at a loss. This screw won't budge, and at this point, it's 
> probably totally threaded. I'm not good or experienced with this kind 
> of thing...anyone have any suggestions?
"The complete frame is a kit, which is fixed by screws. You might
unscrew 
the side panel, which is closer to the stuck screw. After that you can 
draw the module with the nut bar out of the profile, which holds the nut

bar. when the nut bar and the module are removed from he profile, it 
should be more easy to grab the screws head with pliers."

Looks a little scary, but if telekinesis doesn't work, I might try that.
Thanks...the stuck screw is in the middle (top right of the a-155), to
the left of the a-154, so I'm visualizing this very well, but maybe if I
drink enough before I do it...

Gene



 
Yahoo! Groups Links