Doepfer

Yeah - that kind of does sound worth a try...makes sense.

thanks


-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of James Husted
Sent: Tuesday, January 31, 2006 5:09 PM
To: Doepfer_a100@yahoogroups.com
Subject: Re: [Doepfer_a100] Dumb question/ stuck screw in a-100


Try holding a ice cube against the screw - or whatever means you can  
to make the screw colder then the chassis.  The goal is to make the  
screw shrink in size while the chassis does not. Works often enough  
to try before other methods.

James Husted
James.husted@mac.com
http://homepage.mac.com/ersatzplanet/

"Welcome to the first day of the rest of your money."



On Jan 29, 2006, at 9:38 PM, Gene Schwartz wrote:

> I purchased a used case of a-100 modules to supplement my existing 
> system. The only problem is that one of the screws for the a-155 
> sequencer module is totally stuck. This wouldn't concern me so much 
> except I might be buying a second a-155, and would need to remove it 
> temporarily to make the proper connections.
>
> It was suggested that I try a pair of pliers to try to get it out, but

> all I suceeded in doing was scratching the surface ):
>
> I am at a loss. This screw won't budge, and at this point, it's
> probably
> totally threaded. I'm not good or experienced with this kind of
> thing...anyone have any suggestions?
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>



 
Yahoo! Groups Links