Doepfer

Thanks - I've arranged to borrow one of these from a friend, and I
should probably buy one anyway to have around.

Gene


-----Original Message-----
From: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
On Behalf Of Dieter Doepfer
Sent: Wednesday, February 01, 2006 4:25 AM
To: Doepfer_a100@yahoogroups.com
Subject: AW: [Doepfer_a100] Dumb question/ stuck screw in a-100


Here in Germany special "negative" drills (with inverse or left spiral)
are availabe at hardware stores. You need a powered hand drill with both
right and left rotary direction. Most battery powered hand drills have
this option available. With this tool it should be no problem to remove
stuck screws.

Best wishes
Dieter Doepfer

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com 
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von Gene Schwartz
> Gesendet: Montag, 30. Januar 2006 06:38
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Dumb question/ stuck screw in a-100
>
>
> I purchased a used case of a-100 modules to supplement my existing 
> system. The only problem is that one of the screws for the a-155 
> sequencer module is totally stuck. This wouldn't concern me so much 
> except I might be buying a second a-155, and would need to remove it 
> temporarily to make the proper connections.
>
> It was suggested that I try a pair of pliers to try to get it out, but

> all I suceeded in doing was scratching the surface ):
>
> I am at a loss. This screw won't budge, and at this point, it's 
> probably totally threaded. I'm not good or experienced with this kind 
> of thing...anyone have any suggestions?
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>



 
Yahoo! Groups Links