Doepfer

hi andreas,
....the only modules that have a rather big
possibility of being released are the vactrol
phaser/filter and of course ,the sensor keyboard(99%
possibility) and the ribbon controller(99%).
i ,also,would like to see these two modules( that you
mentioned) released.
o...,i remember...dieter told me that the graphic vco,
will possibly not being released as it would be
nothing more than a fader version of the a155.(he told
me that, because,if you clock the a155 from an
a110(and have the a110 track the keyboard from cv1
input) you then have a graphic vco,but you have to
pass the a155 cv from a filter or from  the older
version a130/131 in order to become an AC signal.i
haven't tried it,though.he,also,told me that they have
not tested that function ,but he beleives that the
a155 will work fine up to 10 khz...i tried to clock
the a155 with the a111 but after a while the a155
stopped running(that's possibly because the pulse from
the a111 isn't perfect???)the a155 needs a perfect
pulse signal to recognise as a clock source,but the
new a155's have a small modification that lets them
recognise as clock signals even triangle
wave(!!)signals...i tried to clock the new a155 of
mine,but this mod. prevents the a155 from running at
high/audio speed so i desolder this mod.(it's a
cap+resistor that connects two of the pins of one of
the two chips in the a155 control board(board
4).please,don't try  to change that mod., before you
ask roland mayer for more details( don't destroy a 230
euros module by accident,right??)...
in other words, a graphic vco would be an a155 with a
vco together in one module...
but,i know that the multiple arbitrary function
generator(buchla)must have other functions,too...
it's up to doepfer to decide...(he told me that in the
past he had released a graphic vco ,but,because of the
high price it didn't sell well,that is quite possibly
the reason...),so...?
as for the osciloscope module,we will see,i know
nothing,yet,but to tell you the truth i don't think
that it will be released either,as it will be an
expensive module,too...doepfer decides,as always...


bakis.

--- Andreas Lindholm <andreas.k.lindholm@telia.com>
wrote:
> I agree with Florian, we have to many immature
> polls. That is polls that
> would have been more precise if we had narrowed it
> down by some debate
> first. Now to the offset generator. I may be a
> little wrong here, but I
> don't see much that the vocoder module three can't
> do. Further more the
> vocoder/3 does five separate channels and I think it
> is invaluable and
> actually justifies the high price. You don't get
> that from me too often, do
> you? I first thought it was overpriced for the
> vocoder bit, but now listen
> up her Bakis.
> 
> I use my A129/3 increase to low gate signals from
> other gear such as my
> Sh101 and Syntechno TeeBee. It is also useful if say
> I have an lfo that I
> want to make a positive lfo going from say +0,2 to
> +0,6 volts rather that +4
> and -4. Then you can have another cv from say an
> envelope and make that go
> from negative to positive... OR whatever you like.
> This module adds
> tremendous control over all kinds of signals in my
> opionion and if I hadn't
> filled up my 6U I would like to have another...
> Perhaps I should expand with
> one in a future system upgrade, but that of course
> comes way after I have
> solved my sequencing setup.
> 
> As usual I don't see that a new module is justified
> here, and if I do want a
> new module a graphic VCO or oscilloscope would be
> much higher on my wish
> list. Gotten any response on those from Doepfer
> Bakis?
> 
> /Andreas
> 
> 
> 
> 
> ----- Original Message -----
> From: "Florian Anwander"
> <Florian.Anwander@consol.de>
> To: <Doepfer_a100@yahoogroups.com>
> Sent: Friday, March 01, 2002 4:25 PM
> Subject: Re: [Doepfer_a100] wish 4 a offset
> generator
> 
> 
> > Hi Bakis
> >
> > > very interesting...that means another poll...
> > Please don't always do a poll immediately. I think
> we should discuss here
> > wether something is making sense or not. When we
> have reduced the
> > discussion to two or three possible choices, then
> we should start a poll.
> >
> > Only in Italy they do a new election each time a
> new possible candidate
> > appears on the screen ;))
> >
> > Florian
> > --
> > Florian Anwander                  |ConSol* 
> HP-Support
> > Tel.   +49.89.45841-133          
> |Consulting&Solutions Software GmbH
> > Fax    +49.89.45841-139          
> |Franziskanerstr. 38, D-81669 M�nchen
> > email: florian.anwander@consol.de
> |http://www.consol.de
> >
> >
> > To unsubscribe from this group, send an email to:
> > doepfer_a100-unsubscribe@yahoogroups.com
> >
> >
> >
> > Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
> >
> >
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
Yahoo! Greetings - Send FREE e-cards for every occasion!
http://greetings.yahoo.com