Doepfer

It is interesting that too hear that the A155 could make a graphic VCO with
the standard VCO. Now I find the A155 a bit pricey and I don't really have a
good feeling for "in theory but not tested" so it would be nice to hear if
anybody indeed does pull it off. Anyway I always dreamed of having a graphic
VCO(thus I draw waves on the computer and loop them, if the sampler module
was a bit better I would buy that, but 8 bit is too low for me). I not sure
what kind of graphic LFO Dieter designed, but I sure would like to see the
specs for it.

On the other hand it might have been something totally different from what I
have thought about. As I have pictures it there should be an oscilloscope in
it or even better as a separate module(that can be used with everything in
the A100). Then I have thought about something like 8segments with a
knob/slider and a switch an two jacks for each. The switch and one jack for
selecting the slope (Log/lin/square) the other to set the the value of the
segment end point (the start for the first and the end for the rest). The
jacks of course for cv-control from other modules. 8segments seems more than
sufficent for me, perhaps even 4 could be enough.

What have you guys been dreaming up when thinking "graphic VCO"?

Of course still I think there are other more high on the agenda task that
doepfer should do first.

/Andreas



----- Original Message -----
From: "bakis Sirros" <synth_freak_2000@yahoo.com>
To: <Doepfer_a100@yahoogroups.com>
Sent: Friday, March 01, 2002 10:56 PM
Subject: Re: [Doepfer_a100] wish 4 a offset generator

> o...,i remember...dieter told me that the graphic vco,
> will possibly not being released as it would be
> nothing more than a fader version of the a155.(he told
> me that, because,if you clock the a155 from an
> a110(and have the a110 track the keyboard from cv1
> input) you then have a graphic vco,but you have to
> pass the a155 cv from a filter or from  the older
> version a130/131 in order to become an AC signal.i
> haven't tried it,though.he,also,told me that they have
> not tested that function ,but he beleives that the
> a155 will work fine up to 10 khz...i tried to clock
> the a155 with the a111 but after a while the a155
> stopped running(that's possibly because the pulse from
> the a111 isn't perfect???)the a155 needs a perfect
> pulse signal to recognise as a clock source,but the
> new a155's have a small modification that lets them
> recognise as clock signals even triangle
> wave(!!)signals...i tried to clock the new a155 of
> mine,but this mod. prevents the a155 from running at
> high/audio speed so i desolder this mod.(it's a
> cap+resistor that connects two of the pins of one of
> the two chips in the a155 control board(board
> 4).please,don't try  to change that mod., before you
> ask roland mayer for more details( don't destroy a 230
> euros module by accident,right??)...
> in other words, a graphic vco would be an a155 with a
> vco together in one module...
> but,i know that the multiple arbitrary function
> generator(buchla)must have other functions,too...
> it's up to doepfer to decide...(he told me that in the
> past he had released a graphic vco ,but,because of the
> high price it didn't sell well,that is quite possibly
> the reason...),so...?
> as for the osciloscope module,we will see,i know
> nothing,yet,but to tell you the truth i don't think
> that it will be released either,as it will be an
> expensive module,too...doepfer decides,as always...
>
>
> bakis.
>
> --- Andreas Lindholm <andreas.k.lindholm@telia.com>
> wrote:
> > I agree with Florian, we have to many immature
> > polls. That is polls that
> > would have been more precise if we had narrowed it
> > down by some debate
> > first. Now to the offset generator. I may be a
> > little wrong here, but I
> > don't see much that the vocoder module three can't
> > do. Further more the
> > vocoder/3 does five separate channels and I think it
> > is invaluable and
> > actually justifies the high price. You don't get
> > that from me too often, do
> > you? I first thought it was overpriced for the
> > vocoder bit, but now listen
> > up her Bakis.
> >
> > I use my A129/3 increase to low gate signals from
> > other gear such as my
> > Sh101 and Syntechno TeeBee. It is also useful if say
> > I have an lfo that I
> > want to make a positive lfo going from say +0,2 to
> > +0,6 volts rather that +4
> > and -4. Then you can have another cv from say an
> > envelope and make that go
> > from negative to positive... OR whatever you like.
> > This module adds
> > tremendous control over all kinds of signals in my
> > opionion and if I hadn't
> > filled up my 6U I would like to have another...
> > Perhaps I should expand with
> > one in a future system upgrade, but that of course
> > comes way after I have
> > solved my sequencing setup.
> >
> > As usual I don't see that a new module is justified
> > here, and if I do want a
> > new module a graphic VCO or oscilloscope would be
> > much higher on my wish
> > list. Gotten any response on those from Doepfer
> > Bakis?
> >
> > /Andreas
> >
> >
> >
> >
> > ----- Original Message -----
> > From: "Florian Anwander"
> > <Florian.Anwander@consol.de>
> > To: <Doepfer_a100@yahoogroups.com>
> > Sent: Friday, March 01, 2002 4:25 PM
> > Subject: Re: [Doepfer_a100] wish 4 a offset
> > generator
> >
> >
> > > Hi Bakis
> > >
> > > > very interesting...that means another poll...
> > > Please don't always do a poll immediately. I think
> > we should discuss here
> > > wether something is making sense or not. When we
> > have reduced the
> > > discussion to two or three possible choices, then
> > we should start a poll.
> > >
> > > Only in Italy they do a new election each time a
> > new possible candidate
> > > appears on the screen ;))
> > >
> > > Florian
> > > --
> > > Florian Anwander                  |ConSol*
> > HP-Support
> > > Tel.   +49.89.45841-133
> > |Consulting&Solutions Software GmbH
> > > Fax    +49.89.45841-139
> > |Franziskanerstr. 38, D-81669 München
> > > email: florian.anwander@consol.de
> > |http://www.consol.de
> > >
> > >
> > > To unsubscribe from this group, send an email to:
> > > doepfer_a100-unsubscribe@yahoogroups.com
> > >
> > >
> > >
> > > Your use of Yahoo! Groups is subject to
> > http://docs.yahoo.com/info/terms/
> > >
> > >
> >
> >
>
>
> =====
> synthfreak(parallel worlds)
> athens-greece
> [Doepfer_a100] group owner-moderator
>
> __________________________________________________
> Do You Yahoo!?
> Yahoo! Greetings - Send FREE e-cards for every occasion!
> http://greetings.yahoo.com
>
>
> To unsubscribe from this group, send an email to:
> doepfer_a100-unsubscribe@yahoogroups.com
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>