Doepfer

thanks mdimmm,
i asked for the a199...as for your other questions...i
don't have the freq. shifter so i can't help you on
that...a way to create a manual gate is by using the
a155 stopped(but with the start button on,i think...)
in a step you want and send gate signals from the gate
output(row 4),also with the cv source module if you
turn the knob fully to the right it send a+5volts
signal so you can use it like a gate source....

bakis.

--- mdimmm <mdimmm@yahoo.com> wrote:
> As anyone who owns a spring reverb module knows, the
> A-100's 
> transformer generates a lot of hum. In addition to
> the spring 
> reverb, I use a lot of electromagnetic pick-ups
> (like on a guitar) 
> as external signal inputs  and find the hum almost
> unacceptable 
> with this set-up. I hope someone might have
> suggestions for 
> shielding the transformer, or knows of other ways to
> decrease 
> the hum generated by the A-100.
> 
> My A-126 Frequency Shifter seems to add a sine wave
> of almost 
> equal strength to any signal I plug into the module,
> has anyone 
> else had this problem? I don't seem to be able to
> frequency shift 
> anything without adding a loud sine tone to it, even
> when using 
> high input signal coming from an A-110, for example.
> 
> I'd also like to know about ways to create a manual
> gate, without 
> a keyboard. A simple way to open/close a signal
> path...
> 
> To the person who asked about the spring reverb, I
> like it a lot. It 
> adds a very characteristic sound of its own, because
> of the 
> resonance of the springs, so it's in no way a
> "neutral" sounding 
> reverb. The springs offer very tactile ways for
> changing sounds 
> though, because they're very sensitive to vibration.
> 
> 
> 
> Thanks,
> 
> Dimm M.
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do You Yahoo!?
Yahoo! Sports - sign up for Fantasy Baseball
http://sports.yahoo.com