Yahoo Groups archive

Doepfer

Index last updated: 2026-04-29 00:15 UTC

Thread

MCV24 Help

MCV24 Help

2007-03-06 by zanalogheaven

Hello,

I was wondering if anyone knows what the standard tuning to get 
1V/Oct on the MCV24 is? 

Is it:

Tune Note #1: 0
CV #1 Coarse: 0
CV #1 Fine: 0

and 

Tune Note #2: 96
CV #1 Coarse: 102
CV #1 Fine: 17

as it says in the manual? that doesn't seem to work on any of my 
1V/Oct synths.

Thanks.

AW: [Doepfer_a100] MCV24 Help

2007-03-07 by hardware@doepfer.de

> Hello,
>
> I was wondering if anyone knows what the standard tuning to get
> 1V/Oct on the MCV24 is?
>
> Is it:
>
> Tune Note #1: 0
> CV #1 Coarse: 0
> CV #1 Fine: 0
>
> and
>
> Tune Note #2: 96
> CV #1 Coarse: 102
> CV #1 Fine: 17
>
> as it says in the manual? that doesn't seem to work on any of my
> 1V/Oct synths.
>
> Thanks.

I'm not the MCV24 specialist but as far as I know it is not possible to tell
you the settings for exactly 1V/Octave as there are small tolerances between
the units (DAC tolerances) that can be adjusted by software. If you need
details please contact Christian Assall: software@doepfer.de. He is our
MCV24 specialist and has written both the firmware and user's manual of the
MCV24.

Best wishes
Dieter Doepfer

New module announcement

2007-03-07 by hardware@doepfer.de

In Frankfurt we will show the prototype of a new module:

A-135-2 Quad voltage controlled Filter/Mixer/Panner

The preliminary information is available on our website:
www.doepfer.de/a1352.htm

Best wishes
Dieter Doepfer

Re: [Doepfer_a100] New module announcement

2007-03-07 by Bakis Sirros

hello dieter,
very nice!
that plus four expander modules would make great
modules for 4-voice polysynth patches.
the expander modules will be connected to the a135-2
via ribbon cables, right?
best regards,
Bakis.



--- hardware@doepfer.de wrote:

> In Frankfurt we will show the prototype of a new
> module:
> 
> A-135-2 Quad voltage controlled Filter/Mixer/Panner
> 
> The preliminary information is available on our
> website:
> www.doepfer.de/a1352.htm
> 
> Best wishes
> Dieter Doepfer
> 
> 


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
http://www.parallel-worlds-music.com
http://www.myspace.com/parallelworldsmusic
http://www.myspace.com/interconnectedmusic
http://www.DiN.org.uk
http://www.shimarecords.co.uk
http://www.rubber.gr
Athens-Greece


 
____________________________________________________________________________________
Don't pick lemons.
See all the new 2007 cars at Yahoo! Autos.
http://autos.yahoo.com/new_cars.html

AW: [Doepfer_a100] New module announcement

2007-03-07 by hardware@doepfer.de

> hello dieter,
> very nice!
> that plus four expander modules would make great
> modules for 4-voice polysynth patches.
> the expander modules will be connected to the a135-2
> via ribbon cables, right?
> best regards,
> Bakis.

Right. No soldering will be necessary, just ribbon cables similar to the bus
connection or A-154/A-155 wiring.

Best wishes
Dieter Doepfer

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.