Copy of an earlier response: A-135-2
2007-04-20 by hardware@doepfer.de
Robert, you find my comments written inline. Best wishes Dieter Doepfer > hello > > is tehre any idea when it will finnaly comes out? the version shown at the Musikmesse Frankfurt could be available within about two months. But there was a lot of discussion about additional features (e.g. mute switches or buttons) and the type CV connections (integrated to the module or as separate modules with or/without attenuators and many more). Finally it will depend upon the results of the discussion when the module will be available. The additional suggestions mainly concern to the front panel layout (which socket or control or switch at which position) but not the basic functions. > is this architecture already closed? no, but the basic architecture (VCF with VCQ, VCA, VC panning section for each sub-module) will not be changed. > what is really good that all inputs and outs go an down of the panel > - I hope it gets easier to the knobs definitely. The main idea is live mixing/filtering/panning of 4/8/12... inputs and for this application socket in the upper area of the front panel would be bothering. > I would say I prefere 4 cv pan in main module than filter sections > but this will be then very close to Plan B prototype The idea of the module was a four-fold VCF+VCA+Pan. So the filter sections will not be omitted. > I hope finnaly it will go very compact and save a lot of space > as this seems to be finaly good solution for live performances > as far paning vca was poor option > > And finaly it will has possibilti to have four separate cv for pan? Of course. One has a separate CV for each parameter of each sub-module - even panning. > I mean do do cv pan for each channel separately yes.
Show quoted textHide quoted text
> cos only this have sense by my opinion > > looking forward some reflecions > and module > > best > robert