Doepfer

Hello,

for sequencing (and I do a lot of sequencing ;-) ) I am looking for a 
supersimple Envelope/VCA combi module:

Basically an A-142 VC-Decay with one half of an A-132 VCA. I would not 
need the gate part of the A-142. And it would be ok to have only one 
knob for the Decaytime, which feeds either an external CV or works as 
simple decaytime knob (a fixed voltage provided via switched socket).

Blockschematic in ASCII might look like this:

       ExtCV in
+5V--> O--+
           |      ...........
          PP      .         .
          PP<---->Decay-CV  .
          PP      .         .
           |      .    EnvOut----\
          ---     ...........    |
                                 |
                             ....v....
  AudioIn------------------->.  VCA  .-----> AudioOut
                             .........



What do you think about it?

Florian

Sounds pretty good to me although I reckon you could keep the two
Decay pots and still have room for the VCA functionality if either the
inverted gate output was left off of things were squeezed up a bit.

I'd probably buy a few.

Cheers,
Adam-V
--- In Doepfer_a100@yahoogroups.com, Florian Anwander
<Florian.Anwander@...> wrote:

>
> Hello,
> 
> for sequencing (and I do a lot of sequencing ;-) ) I am looking for a 
> supersimple Envelope/VCA combi module:
> 
> Basically an A-142 VC-Decay with one half of an A-132 VCA. I would not 
> need the gate part of the A-142. And it would be ok to have only one 
> knob for the Decaytime, which feeds either an external CV or works as 
> simple decaytime knob (a fixed voltage provided via switched socket).
> 
> Blockschematic in ASCII might look like this:
> 
>        ExtCV in
> +5V--> O--+
>            |      ...........
>           PP      .         .
>           PP<---->Decay-CV  .
>           PP      .         .
>            |      .    EnvOut----\
>           ---     ...........    |
>                                  |
>                              ....v....
>   AudioIn------------------->.  VCA  .-----> AudioOut
>                              .........
> 
> 
> 
> What do you think about it?
> 
> Florian
>

Hi Adam

> Sounds pretty good to me although I reckon you could keep the two
> Decay pots and still have room for the VCA functionality if either the
> inverted gate output was left off of things were squeezed up a bit.
If it was that reduced one module could carry two divisions.

Florian

So that would be two decay envelopes with a basic VCA attached to 
each?

Sounds quite tasty to me.

Cheers,
Adam-V

--- In Doepfer_a100@yahoogroups.com, Florian Anwander 
<Florian.Anwander@...> wrote:
>
> Hi Adam
> 
> > Sounds pretty good to me although I reckon you could keep the two
> > Decay pots and still have room for the VCA functionality if 
either the
> > inverted gate output was left off of things were squeezed up a 
bit.

> If it was that reduced one module could carry two divisions.
> 
> Florian
>