Doepfer

Did anyone work with the Modules from Lindhof

http://www.msc175.de/ (only in german, sorry)

Any experience?

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de

I bought a Lindhof ringmodulator DIY-kit on ebay about two months ago. Easy to do and compatible with Doepfer, as it runs with 12V although it is based on the Formant Pro, which usually runs with 15V. 
It sounds okay, but different than the A-114. The only problem is that if only one signal is patched into the ringmodulator, it is still audible on the output. But I think it might be my fault, as I didn´t really manage to calibrate the PCB (that one is my first powered DIY-module, I must admit..).

Paul


>Did anyone work with the Modules from Lindhof [...]Any experience?<


[Non-text portions of this message have been removed]

Hi Paul 

>It sounds okay, but different than the A-114. The only problem is that if only one 
>signal is patched into the ringmodulator, it is still audible on the output. But I 
>think it might be my fault, as I didn´t really manage to calibrate the PCB (that one is 
>my first powered DIY-module, I must admit..).
It is a good sign for a kit, that it works ok for a beginner. The problem
with the feedthrough is more or less common to all ringmods whith the 1496.
As far as I remember also the Doepfer ringmod does use it.

My Doepfer Ringmodulator also has a light feedthrough.

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de