Doepfer

Hello, me again with an "issue" . Wonderin about my sample&hold unit, the upperone 
fuctions precisly as I expect it to but he lower act as an sample and hold but it also adds the 
trig and sample in input signals to the output signal, this can be actually a quite nice effect, 
but is this a "feature" or is this not working correctly?

-Wille

> Hello, me again with an "issue" . Wonderin about my sample&hold  unit, the
upperone
> fuctions precisly as I expect it to but he lower act as an sample and hold
but it also adds the
> trig and sample in input signals to the output signal, this can be
actually a quite nice effect,
> but is this a "feature" or is this not working correctly?
>
> -Wille

If it really works as you descibed it's a fault.

Pay attention that the factory setting of the new version of the A-148 is

upper unit = S&H
lower unit = T&H

Maybe this is what you discovered. But the trig input signal should not
appear at the output.

Best wishes
Dieter Doepfer

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> > Hello, me again with an "issue" . Wonderin about my sample&hold  unit, the
> upperone
> > fuctions precisly as I expect it to but he lower act as an sample and hold
> but it also adds the
> > trig and sample in input signals to the output signal, this can be
> actually a quite nice effect,
> > but is this a "feature" or is this not working correctly?
> >
> > -Wille
> 
> If it really works as you descibed it's a fault.
> 
> Pay attention that the factory setting of the new version of the A-148 is
> 
> upper unit = S&H
> lower unit = T&H
> 
> Maybe this is what you discovered. But the trig input signal should not
> appear at the output.
> 
> Best wishes
> Dieter Doepfer

yup, youre right, it was the track and hold that makes it sound like the noise is coming 
through when the triggering lfo has a narrow pulse, i thought it cant be that because a 
ms20 has track and hold (?) an it HAS to have a narrow pulse to sound like sample and 
hold... confusing....
>

Ahhh,
That answered my question!


Is there any way to change the upper into a T&H?


--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> > Hello, me again with an "issue" . Wonderin about my sample&hold  
unit, the
> upperone
> > fuctions precisly as I expect it to but he lower act as an 
sample and hold
> but it also adds the
> > trig and sample in input signals to the output signal, this can 
be
> actually a quite nice effect,
> > but is this a "feature" or is this not working correctly?
> >
> > -Wille
> 
> If it really works as you descibed it's a fault.
> 
> Pay attention that the factory setting of the new version of the A-
148 is
> 
> upper unit = S&H
> lower unit = T&H
> 
> Maybe this is what you discovered. But the trig input signal 
should not

> appear at the output.
> 
> Best wishes
> Dieter Doepfer
>

> Ahhh,
> That answered my question!
>
> Is there any way to change the upper into a T&H?

www.doepfer.com > PRODUCTS > A-100 > Modules Overview > A-148 (bottom of the
info page)

Best wishes
Dieter Doepfer

If it had been a snake, it would have bit me.

Fantastic!

Thank you Mr. Doepfer!


--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> > Ahhh,
> > That answered my question!
> >
> > Is there any way to change the upper into a T&H?
> 
> www.doepfer.com > PRODUCTS > A-100 > Modules Overview > A-148
(bottom of the

> info page)
> 
> Best wishes
> Dieter Doepfer
>