Doepfer

Hi everyone,

My MCV24 has frozen up and stopped working.

Can anyone tell me how to resolve the issue with MCV24 when it displays:
"WARMBOOT MCV24" and then freezes.

Doepfer's website says "Press all three dials, release them and wait for the system to 
correct itself."
When doing this on my unit, the display changes, I notice it says"Cold Boot 12bit DAC" but 
then it quickly changes to say "WARM BOOT MCV24 Calc 8BitDAC - Tab" then freezes 
again.

This is as far as I have got.

Any ideas anyone?

many thanks in advance,

Rob

> Hi everyone,
>
> My MCV24 has frozen up and stopped working.
>
> Can anyone tell me how to resolve the issue with MCV24 when it displays:
> "WARMBOOT MCV24" and then freezes.
>
> Doepfer's website says "Press all three dials, release them and
> wait for the system to
> correct itself."
> When doing this on my unit, the display changes, I notice it
> says"Cold Boot 12bit DAC" but
> then it quickly changes to say "WARM BOOT MCV24 Calc 8BitDAC -
> Tab" then freezes
> again.
>
> This is as far as I have got.
>
> Any ideas anyone?
>
> many thanks in advance,
>
> Rob

Please contact Christian Assall: software(at)doepfer(dot)de. He is familiar
with the MCV24, programmed the firmware and wrote the user's manual.

Best wishes
Dieter Doepfer

I recently started experiencing weird behaviour on my MCV24 with my 
Korg MS-20, tried to reboot it by holding down the three buttons, it 
froze with just a "-" in the middle, and now when it boots it 
says "error in tabs" and I can't scroll to any parameters.

E-mailed Chris about it, waiting for a response...

--- In Doepfer_a100@yahoogroups.com, <hardware@...> wrote:
>
> > Hi everyone,
> >
> > My MCV24 has frozen up and stopped working.
> >
> > Can anyone tell me how to resolve the issue with MCV24 when it 
displays:
> > "WARMBOOT MCV24" and then freezes.
> >
> > Doepfer's website says "Press all three dials, release them and
> > wait for the system to
> > correct itself."
> > When doing this on my unit, the display changes, I notice it
> > says"Cold Boot 12bit DAC" but
> > then it quickly changes to say "WARM BOOT MCV24 Calc 8BitDAC -
> > Tab" then freezes
> > again.
> >
> > This is as far as I have got.
> >
> > Any ideas anyone?
> >
> > many thanks in advance,
> >
> > Rob
> 
> Please contact Christian Assall: software(at)doepfer(dot)de. He is 
familiar

> with the MCV24, programmed the firmware and wrote the user's manual.
> 
> Best wishes
> Dieter Doepfer
>

> -----Ursprüngliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com
> [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von regimental1200
> Gesendet: Freitag, 11. Juli 2008 04:31
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Re: WARMBOOT MCV24 error
>
>
> I recently started experiencing weird behaviour on my MCV24 with my
> Korg MS-20, tried to reboot it by holding down the three buttons, it
> froze with just a "-" in the middle, and now when it boots it
> says "error in tabs" and I can't scroll to any parameters.
>
> E-mailed Chris about it, waiting for a response...

Are you sure you used software@doepfer.de. Chris is answering emails daily.

Best wishes
Dieter Doepfer