Doepfer

Hi folks

I want to install two Analogue Solutions modules requiring +5v power into a Doepfer wooden 
budget case and have a couple of questions:

* Is installing the +5v adaptor straightforward?

* Do I need an adaptor for each +5v module or how many can I run from one adaptor?

Thanks in advance
Mark

Many thanks Florian




--- In Doepfer_a100@yahoogroups.com, Florian Anwander <Florian.Anwander@...> wrote:

>
> Hi Mark
> 
> > * Is installing the +5v adaptor straightforward?
> like the cable of a standard module.
> 
> > * Do I need an adaptor for each +5v module or how many can I run from one adaptor?
> not necessarily. http://www.doepfer.de/a100z_e.htm says up to 100mA. Pay 
> attention: this is the current on the 5V rail, not the all over current 
> consumption of the modul.
> 
> Florian
>

Hi Mark

> * Is installing the +5v adaptor straightforward?
like the cable of a standard module.

> * Do I need an adaptor for each +5v module or how many can I run from one adaptor?
not necessarily. http://www.doepfer.de/a100z_e.htm says up to 100mA. Pay 
attention: this is the current on the 5V rail, not the all over current 
consumption of the modul.

Florian