Doepfer

All -
Why on earth would you want to change the mini plugs to bananajacks anyway!
If you need to connect the Doepfer mods to an older vintage system, why not
just buy a few blank panels, drill some holes, add the banana jacks and
you're good to good.  I've had both - mini+banana and all mini, and IMHO I
think that the single mini is the most versatile.

Rick Guido

-----Original Message-----
From: Florian_Anwander [mailto:Florian.Anwander@consol.de]
Sent: Friday, November 09, 2001 6:44 AM
To: Doepfer_a100@yahoogroups.com
Subject: Re: [Doepfer_a100] electrical nerds listen up!


Hi Kris

> Sure why not?  Just unsolder, attach some fly-wires, and run them to the
> banana jacks?  I don't remember how much space there is but with the mini
> jacks removed, why not?
Try and you will see: the Bananajack needs additional space for the
thread and nut, which is not needed for the onboard jacks.

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de

To unsubscribe from this group, send an email to:
doepfer_a100-unsubscribe@yahoogroups.com

 

Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Hi Richard 

> Why on earth would you want to change the mini plugs to bananajacks anyway!
> If you need to connect the Doepfer mods to an older vintage system, why not
> just buy a few blank panels, drill some holes, add the banana jacks and
> you're good to good.  I've had both - mini+banana and all mini, and IMHO I
> think that the single mini is the most versatile.
Under mechanical aspects the mini jack is the worst jack, you can use.
Banana jacks have the slight advantage, that they are stackable to a
certain limit, so you do not need a multiple for each out put which
shall feed two inputs.

The best would be 1/4" or "tiny" telephone jacks.

If I had the time to do the effort, I would change my system to 1/4"
standard jacks.

Florian
-- 
Florian Anwander                  |ConSol*  HP-Support
Tel.   +49.89.45841-133           |Consulting&Solutions Software GmbH
Fax    +49.89.45841-139           |Franziskanerstr. 38, D-81669 München
email: florian.anwander@consol.de |http://www.consol.de