Synth-DIY Yahoo! Groups Archives

Thread

Poll results for Doepfer_a100

2009-02-09 by Doepfer_a100@yahoogroups.com

The following Doepfer_a100 poll is now closed.  Here are the 
final results: 


POLL QUESTION: Would you like Doepfer to manufacture a Tendency Processor Module? (such a module would have
the advantage that not only a random voltage but any other control voltage
(LFO, ADSR and even audio) could be processed. The module could be developed
within less than one day and the price would be in the 50-60 Euro range.
The module could look like this:
-'Manual Control for U (upper voltage)',
-'CV-Input with attenuator for U (upper voltage)',
-'Manual Control for L (lower voltage)',
-'CV-Input with attenuator for L (lower voltage)',
-'Input',
-'Output') 

CHOICES AND RESULTS
- Yes!, 17 votes, 68.00%  
- maybe..., 4 votes, 16.00%  
- No., 4 votes, 16.00%  



For more information about this group, please visit 
http://groups.yahoo.com/group/Doepfer_a100 

For help with Yahoo! Groups, please visit
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.html

AW: [Doepfer_a100] Poll results for Doepfer_a100

2009-02-11 by yahoo@doepfer.de

Thank you for your interest. I'll heat-up the soldering iron.

Best wishes
Dieter Doepfer

Show quoted textHide quoted text

> -----Ursprungliche Nachricht-----
> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
> Gesendet: Dienstag, 10. Februar 2009 01:15
> An: Doepfer_a100@yahoogroups.com
> Betreff: [Doepfer_a100] Poll results for Doepfer_a100
>
> The following Doepfer_a100 poll is now closed.  Here are the
> final results:
>
>
> POLL QUESTION: Would you like Doepfer to manufacture a Tendency
> Processor Module? (such a module would have
> the advantage that not only a random voltage but any other control voltage
> (LFO, ADSR and even audio) could be processed. The module could
> be developed
> within less than one day and the price would be in the 50-60 Euro range.
> The module could look like this:
> -'Manual Control for U (upper voltage)',
> -'CV-Input with attenuator for U (upper voltage)',
> -'Manual Control for L (lower voltage)',
> -'CV-Input with attenuator for L (lower voltage)',
> -'Input',
> -'Output')
>
> CHOICES AND RESULTS
> - Yes!, 17 votes, 68.00%
> - maybe..., 4 votes, 16.00%
> - No., 4 votes, 16.00%

Re: [Doepfer_a100] Poll results for Doepfer_a100

2009-02-12 by achtung_999

Hello Dieter,

Nice that this is happening!!

Some notes on the side though: I have been investigating further (with
quite some help) into the workings of the Tendency Mask Generator.
The workings of the calculations you proposed for the Tendency
Processor don't act entirely like the TMG.
However.. this idea is also nice and a valid extension to the eurorack
module roster I think.
I have also been visiting the people at Sonology twice and there is
something coming off the ground there too.
The original designer of the unit has been asked to redesign the unit
to work in Eurorack format.
This will likely appear as a limited edition DIY kit. This is all
still very premature and these people have a lot of other things on
their minds.
I do believe, like I said earlier, that both inititives don't inflict
on each other.

Greetings,

Ernst

Show quoted textHide quoted text

On Wed, Feb 11, 2009 at 12:32 PM,  <yahoo@doepfer.de> wrote:
> Thank you for your interest. I'll heat-up the soldering iron.
>
> Best wishes
> Dieter Doepfer
>
>> -----Ursprungliche Nachricht-----
>> Von: Doepfer_a100@yahoogroups.com [mailto:Doepfer_a100@yahoogroups.com]
>> Gesendet: Dienstag, 10. Februar 2009 01:15
>> An: Doepfer_a100@yahoogroups.com
>> Betreff: [Doepfer_a100] Poll results for Doepfer_a100
>
>>
>> The following Doepfer_a100 poll is now closed. Here are the
>> final results:
>>
>>
>> POLL QUESTION: Would you like Doepfer to manufacture a Tendency
>> Processor Module? (such a module would have
>> the advantage that not only a random voltage but any other control voltage
>> (LFO, ADSR and even audio) could be processed. The module could
>> be developed
>> within less than one day and the price would be in the 50-60 Euro range.
>> The module could look like this:
>> -'Manual Control for U (upper voltage)',
>> -'CV-Input with attenuator for U (upper voltage)',
>> -'Manual Control for L (lower voltage)',
>> -'CV-Input with attenuator for L (lower voltage)',
>> -'Input',
>> -'Output')
>>
>> CHOICES AND RESULTS
>> - Yes!, 17 votes, 68.00%
>> - maybe..., 4 votes, 16.00%
>> - No., 4 votes, 16.00%
>
>