Doepfer

I have a G6 case and obviously the current draw of all the modules is
less than the 1.2A max of the psu2. In fact it is currently way less
than 400ma. Can I safely add another 6U case and connect it to the
PSU2 via doepfer bus boards or is one 3U more enough?

I heard that as you draw too much power from the supply the total
noise can increase.

I'm using the DIY Kit#1 to power 3 rows (9u total).  Most the modules
in that case don't draw a lot of power, and I only have two
oscillators in it, I don't hear any noise.

On Fri, Feb 13, 2009 at 3:57 PM, intellijel <danjel@intellijel.com> wrote:
> I have a G6 case and obviously the current draw of all the modules is
> less than the 1.2A max of the psu2. In fact it is currently way less
> than 400ma. Can I safely add another 6U case and connect it to the
> PSU2 via doepfer bus boards or is one 3U more enough?
>
> I heard that as you draw too much power from the supply the total
> noise can increase.
>
>