Doepfer

hello all

I just got serious troble with PLL module
it started with damage of middle section
position switch stoped to work

I put module out and tried to see if all parts are
corectly setled and after moments
it seems that chip close to power ribon connection
has something with that I touched it and it started to work
but with some breaks

and after all this chip started to just burn with smoke
I took it out, module worked but middle section is not
working

please tell me if this means module is more or less dead
or there is chance i put new chip (easy to find? imptorant one?)
or should I forget about it..

this is one of most improtant module in by set.

Please let me know if you have any infos for me

Also what kind of chip it is

thanks so much

best
robert

Dieter any help...?

i guess this means this chip of the PLL module should need replacing...or maybe send your module back for repair...

btw, indeed the A196 PLL is a really 'special' module.


Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist

[Doepfer_a100] group owner

www. parallel - worlds - music. com

www. myspace. com/ parallelworldsmusic

www. myspace. com/ interconnectedmusic

www. myspace. com/ memorygeist

www. DiN. org. uk

www. musicamaximamagnetica. com

www. shimarecords. co. uk

www. rubberrecords. gr

Athens - Greece

--- On Tue, 11/24/09, robert piotrowicz <rwert@poczta.onet.pl> wrote:

From: robert piotrowicz <rwert@poczta.onet.pl>
Subject: [Doepfer_a100] pll burn
To: Doepfer_a100@yahoogroups.com
Date: Tuesday, November 24, 2009, 2:38 AM







 



  


    
      
      
      hello all



I just got serious troble with PLL module

it started with damage of middle section

position switch stoped to work



I put module out and tried to see if all parts are

corectly setled and after moments

it seems that chip close to power ribon connection

has something with that I touched it and it started to work

but with some breaks



and after all this chip started to just burn with smoke

I took it out, module worked but middle section is not

working



please tell me if this means module is more or less dead

or there is chance i put new chip (easy to find? imptorant one?)

or should I forget about it..



this is one of most improtant module in by set.



Please let me know if you have any infos for me



Also what kind of chip it is



thanks so much



best

robert





    
     

    
    


 



  






      

[Non-text portions of this message have been removed]

> hello all
>
> I just got serious troble with PLL module
> it started with damage of middle section
> position switch stoped to work
>
> I put module out and tried to see if all parts are
> corectly setled and after moments
> it seems that chip close to power ribon connection
> has something with that I touched it and it started to work
> but with some breaks
>
> and after all this chip started to just burn with smoke
> I took it out, module worked but middle section is not
> working
>
> please tell me if this means module is more or less dead
> or there is chance i put new chip (easy to find? imptorant one?)
> or should I forget about it..
>
> this is one of most improtant module in by set.
>
> Please let me know if you have any infos for me
>
> Also what kind of chip it is
>
> thanks so much
>
> best
> robert

The A-196 has 3 integrated circuits: 74HC4046 (PLL circuit), CD4051
(electronic switch) and NE5532N (Dual OpAmp). The NE5532 is next to the bus
connector. All circuits are standard and should be available in your local
electronic shop. Of course you may send in the module for repair too.

Best wishes
Dieter Doepfer

The A-196 has 3 integrated circuits: 74HC4046 (PLL circuit), CD4051
  (electronic switch) and NE5532N (Dual OpAmp). The NE5532 is next to 
the bus
  connector. All circuits are standard and should be available in your 
local
  electronic shop. Of course you may send in the module for repair too.


....

thanks a lot Dieter, thats what I wanted to hear
I going ot buy NE5532 right now,
no time for sending PLL, Japan / Australia tour in next week,
I cant wait :)

all the best
robert piotrowicz

www.myspace.com/robertpiotrowicz

  Best wishes
  Dieter Doepfer



www.musicagenera.net
www.myspace.com/robertpiotrowicz

> thanks a lot Dieter, thats what I wanted to hear
> I going ot buy NE5532 right now,
> no time for sending PLL, Japan / Australia tour in next week,
> I cant wait :)
> 
> all the best
> robert piotrowicz

Good luck with your tour
Dieter Doepfer

Where in Australia are you going?

Cheers,
Adam-V

--- In Doepfer_a100@yahoogroups.com, robert piotrowicz <rwert@...> wrote:

>
> 
>   The A-196 has 3 integrated circuits: 74HC4046 (PLL circuit), CD4051
>   (electronic switch) and NE5532N (Dual OpAmp). The NE5532 is next to 
> the bus
>   connector. All circuits are standard and should be available in your 
> local
>   electronic shop. Of course you may send in the module for repair too.
> 
> 
> ....
> 
> thanks a lot Dieter, thats what I wanted to hear
> I going ot buy NE5532 right now,
> no time for sending PLL, Japan / Australia tour in next week,
> I cant wait :)
> 
> all the best
> robert piotrowicz
> 
> www.myspace.com/robertpiotrowicz
> 
>   Best wishes
>   Dieter Doepfer
> 
> 
> 
> www.musicagenera.net
> www.myspace.com/robertpiotrowicz
>

hej
I do solo shows in Sydney and Melbourne
also take part of big project in Melbourne
and there aslo will join Brutal Truth (grindcore legend from NYC)
may be will play also in Perth
check please: /www.whatismusic.com
thanks
best
r


On 2009-11-24, at 22:39, spiralsect wrote:

Where in Australia are you going?

  Cheers,
  Adam-V

  --- In Doepfer_a100@yahoogroups.com, robert piotrowicz <rwert@...> 
wrote:
  >
  >
  > The A-196 has 3 integrated circuits: 74HC4046 (PLL circuit), CD4051
  > (electronic switch) and NE5532N (Dual OpAmp). The NE5532 is next to
  > the bus
  > connector. All circuits are standard and should be available in your
  > local
  > electronic shop. Of course you may send in the module for repair too.
  >
  >
  > ....
  >
  > thanks a lot Dieter, thats what I wanted to hear
  > I going ot buy NE5532 right now,
  > no time for sending PLL, Japan / Australia tour in next week,
  > I cant wait :)
  >
  > all the best
  > robert piotrowicz
  >
  > www.myspace.com/robertpiotrowicz
  >
  > Best wishes
  > Dieter Doepfer
  >
  >
  >
  > www.musicagenera.net
  > www.myspace.com/robertpiotrowicz
  >



www.musicagenera.net
www.myspace.com/robertpiotrowicz

>

Good luck with your tour
Dieter Doepfer
+++++
thanks again
PLL IS WORKING!!!

respect
rp

wooaah Brutal Truth..
kick ass man !



On Tue, Nov 24, 2009 at 11:00 PM, robert piotrowicz <rwert@poczta.onet.pl>wrote:

> hej
> I do solo shows in Sydney and Melbourne
> also take part of big project in Melbourne
> and there aslo will join Brutal Truth (grindcore legend from NYC)
> may be will play also in Perth
> check please: /www.whatismusic.com
> thanks
> best
> r
>
>
> On 2009-11-24, at 22:39, spiralsect wrote:
>
> Where in Australia are you going?
>
>  Cheers,
>  Adam-V
>
>  --- In Doepfer_a100@yahoogroups.com, robert piotrowicz <rwert@...>
> wrote:
>  >
>  >
>  > The A-196 has 3 integrated circuits: 74HC4046 (PLL circuit), CD4051
>  > (electronic switch) and NE5532N (Dual OpAmp). The NE5532 is next to
>  > the bus
>  > connector. All circuits are standard and should be available in your
>  > local
>  > electronic shop. Of course you may send in the module for repair too.
>  >
>  >
>  > ....
>  >
>  > thanks a lot Dieter, thats what I wanted to hear
>  > I going ot buy NE5532 right now,
>  > no time for sending PLL, Japan / Australia tour in next week,
>  > I cant wait :)
>  >
>  > all the best
>  > robert piotrowicz
>  >
>  > www.myspace.com/robertpiotrowicz
>  >
>  > Best wishes
>  > Dieter Doepfer
>  >
>  >
>  >
>  > www.musicagenera.net
>  > www.myspace.com/robertpiotrowicz
>  >
>
>
>
> www.musicagenera.net
> www.myspace.com/robertpiotrowicz
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>
>


[Non-text portions of this message have been removed]