Yahoo Groups archive
Thread
2010-02-13 by stevebdar
I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case. My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector? Thanks Steve B
2010-02-13 by Bakis Sirros
hi Steve, Plan B modules use the standard doepfer type ribbon power cable. just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends. thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaximamagnetica. com www. vu-us. com www. shimarecords. co. uk --- On Sat, 2/13/10, stevebdar <stevebdar@yahoo.com> wrote:
From: stevebdar <stevebdar@yahoo.com>
Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@yahoogroups.com
Date: Saturday, February 13, 2010, 6:46 AM
I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case.
My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector?
Thanks
Steve B
[Non-text portions of this message have been removed]2010-02-13 by stevebdar
Excellent...thanks Bakis I'll post more as I get my system up. Cheers, Steve --- In Doepfer_a100@yahoogroups.com, Bakis Sirros <synth_freak_2000@...> wrote:
> > hi Steve, > > Plan B modules use the standard doepfer type ribbon power cable. > > just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends. > > thanks, > Bakis. > > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > www. myspace. com/ parallelworldsmusic > > www. myspace. com/ interconnectedmusic > > www. myspace. com/ memorygeist > > www. DiN. org. uk > > www. musicamaximamagnetica. com > > www. vu-us. com > > www. shimarecords. co. uk > > --- On Sat, 2/13/10, stevebdar <stevebdar@...> wrote: > > From: stevebdar <stevebdar@...> > Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case > To: Doepfer_a100@yahoogroups.com > Date: Saturday, February 13, 2010, 6:46 AM > > > > > > > > Â > > > > > > > > > > I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case. > > > > My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector? > > > > Thanks > > > > Steve B > > > > > > > > > > > > > > > > > > > > > > > > > > [Non-text portions of this message have been removed] >
2010-02-22 by Steve
Hi Bakis: Would the same apply to an ASys RS50 and RS60? Thanks Steve B --- On Sat, 2/13/10, Bakis Sirros <synth_freak_2000@yahoo.com> wrote:
From: Bakis Sirros <synth_freak_2000@yahoo.com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@yahoogroups.com
Date: Saturday, February 13, 2010, 2:57 AM
hi Steve,
Plan B modules use the standard doepfer type ribbon power cable.
just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends.
thanks,
Bakis.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagneti ca. com
www. vu-us. com
www. shimarecords. co. uk
--- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote:
From: stevebdar <stevebdar@yahoo. com>
Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 6:46 AM
I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case.
My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector?
Thanks
Steve B
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2010-02-22 by Bakis Sirros
hi Steve, no. Analogue systems modules have different connectors! you can buy special connectors to connect ASystems modules to a doepfer case from analogue systems (or analogue haven, i think): thanks, Bakis. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaximamagnetica. com www. vu-us. com www. shimarecords. co. uk --- On Mon, 2/22/10, Steve <stevebdar@yahoo.com> wrote:
From: Steve <stevebdar@yahoo.com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@yahoogroups.com
Date: Monday, February 22, 2010, 10:31 PM
Hi Bakis:
Would the same apply to an ASys RS50 and RS60?
Thanks
Steve B
--- On Sat, 2/13/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote:
From: Bakis Sirros <synth_freak_ 2000@yahoo. com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 2:57 AM
hi Steve,
Plan B modules use the standard doepfer type ribbon power cable.
just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends.
thanks,
Bakis.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagneti ca. com
www. vu-us. com
www. shimarecords. co. uk
--- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote:
From: stevebdar <stevebdar@yahoo. com>
Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 6:46 AM
I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case.
My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector?
Thanks
Steve B
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2010-02-22 by Richard Scott
No, no, no! please check the Asys website! They use a completely different system! Richard Steve wrote: > > > Hi Bakis: > Â > Would the same apply to an ASys RS50 and RS60? > Â > Â > Thanks > Â > Â > Steve B > > --- On Sat, 2/13/10, Bakis Sirros <synth_freak_2000@yahoo.com > <mailto:synth_freak_2000%40yahoo.com>> wrote: > > From: Bakis Sirros <synth_freak_2000@yahoo.com > <mailto:synth_freak_2000%40yahoo.com>> > Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a > Doepfer 9U Case > To: Doepfer_a100@yahoogroups.com <mailto:Doepfer_a100%40yahoogroups.com> > Date: Saturday, February 13, 2010, 2:57 AM > > Â > > hi Steve, > > Plan B modules use the standard doepfer type ribbon power cable. > > just make sure that the red stripe goes to -12volts on both the busboard > and on the module PCB ends. > > thanks, > Bakis. > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > www. myspace. com/ parallelworldsmusic > > www. myspace. com/ interconnectedmusic > > www. myspace. com/ memorygeist > > www. DiN. org. uk > > www. musicamaximamagneti ca. com > > www. vu-us. com > > www. shimarecords. co. uk > > --- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote: > > From: stevebdar <stevebdar@yahoo. com> > Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a > Doepfer 9U Case > To: Doepfer_a100@ yahoogroups. com > Date: Saturday, February 13, 2010, 6:46 AM > > Â > > I've been buying modules (always looking) for my new modular set-up > which will be housed in a Doepfer a-100lc9 9U case. > > My question is about adding a Plan 9 M17 to this case. Will it connect > to the bus like a standard Doepfer module or will I need a special > ribbon cable and connector? > > Thanks > > Steve B > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > -- I am using the free version of SPAMfighter. We are a community of 6 million users fighting spam. SPAMfighter has removed 1487 of my spam emails to date. Get the free SPAMfighter here: http://www.spamfighter.com/len The Professional version does not have this message
2010-02-22 by Steve
Ok Thanks...I will get some adapters. I also have a Analogue Solutions SQ8. The ribbon and connector look the same as the doepfers I am putting in. Can that work in the case? Cheers, Steve B --- On Mon, 2/22/10, Bakis Sirros <synth_freak_2000@yahoo.com> wrote:
From: Bakis Sirros <synth_freak_2000@yahoo.com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@yahoogroups.com
Date: Monday, February 22, 2010, 2:41 PM
hi Steve,
no.
Analogue systems modules have different connectors!
you can buy special connectors to connect ASystems modules to a doepfer case from analogue systems (or analogue haven, i think):
thanks,
Bakis.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagneti ca. com
www. vu-us. com
www. shimarecords. co. uk
--- On Mon, 2/22/10, Steve <stevebdar@yahoo. com> wrote:
From: Steve <stevebdar@yahoo. com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Monday, February 22, 2010, 10:31 PM
Hi Bakis:
Would the same apply to an ASys RS50 and RS60?
Thanks
Steve B
--- On Sat, 2/13/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote:
From: Bakis Sirros <synth_freak_ 2000@yahoo. com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 2:57 AM
hi Steve,
Plan B modules use the standard doepfer type ribbon power cable.
just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends.
thanks,
Bakis.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagneti ca. com
www. vu-us. com
www. shimarecords. co. uk
--- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote:
From: stevebdar <stevebdar@yahoo. com>
Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 6:46 AM
I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case.
My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector?
Thanks
Steve B
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2010-02-22 by Bakis Sirros
yes, analogue solutions modules use the same connector. red stripe goes to -12volts in the doepfer busboard. Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist [Doepfer_a100] group owner www. parallel - worlds - music. com www. myspace. com/ parallelworldsmusic www. myspace. com/ interconnectedmusic www. myspace. com/ memorygeist www. DiN. org. uk www. musicamaximamagnetica. com www. vu-us. com www. shimarecords. co. uk --- On Tue, 2/23/10, Steve <stevebdar@yahoo.com> wrote:
From: Steve <stevebdar@yahoo.com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@yahoogroups.com
Date: Tuesday, February 23, 2010, 12:08 AM
Ok Thanks...I will get some adapters.
I also have a Analogue Solutions SQ8. The ribbon and connector look the same as the doepfers I am putting in. Can that work in the case?
Cheers,
Steve B
--- On Mon, 2/22/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote:
From: Bakis Sirros <synth_freak_ 2000@yahoo. com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Monday, February 22, 2010, 2:41 PM
hi Steve,
no.
Analogue systems modules have different connectors!
you can buy special connectors to connect ASystems modules to a doepfer case from analogue systems (or analogue haven, i think):
thanks,
Bakis.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagneti ca. com
www. vu-us. com
www. shimarecords. co. uk
--- On Mon, 2/22/10, Steve <stevebdar@yahoo. com> wrote:
From: Steve <stevebdar@yahoo. com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Monday, February 22, 2010, 10:31 PM
Hi Bakis:
Would the same apply to an ASys RS50 and RS60?
Thanks
Steve B
--- On Sat, 2/13/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote:
From: Bakis Sirros <synth_freak_ 2000@yahoo. com>
Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 2:57 AM
hi Steve,
Plan B modules use the standard doepfer type ribbon power cable.
just make sure that the red stripe goes to -12volts on both the busboard and on the module PCB ends.
thanks,
Bakis.
Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist
[Doepfer_a100] group owner
www. parallel - worlds - music. com
www. myspace. com/ parallelworldsmusic
www. myspace. com/ interconnectedmusic
www. myspace. com/ memorygeist
www. DiN. org. uk
www. musicamaximamagneti ca. com
www. vu-us. com
www. shimarecords. co. uk
--- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote:
From: stevebdar <stevebdar@yahoo. com>
Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer 9U Case
To: Doepfer_a100@ yahoogroups. com
Date: Saturday, February 13, 2010, 6:46 AM
I've been buying modules (always looking) for my new modular set-up which will be housed in a Doepfer a-100lc9 9U case.
My question is about adding a Plan 9 M17 to this case. Will it connect to the bus like a standard Doepfer module or will I need a special ribbon cable and connector?
Thanks
Steve B
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]
[Non-text portions of this message have been removed]2010-02-23 by achtung_999
The Analogue Systems adapter that Analogue Haven sells is highly recommended! I have a few AS modules in my Doepfer system. On Tue, Feb 23, 2010 at 12:33 AM, Bakis Sirros <synth_freak_2000@yahoo.com>wrote: > > > yes, analogue solutions modules use the same connector. red stripe goes to > -12volts in the doepfer busboard. > > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > www. myspace. com/ parallelworldsmusic > > www. myspace. com/ interconnectedmusic > > www. myspace. com/ memorygeist > > www. DiN. org. uk > > www. musicamaximamagnetica. com > > > www. vu-us. com > > www. shimarecords. co. uk > > --- On Tue, 2/23/10, Steve <stevebdar@yahoo.com <stevebdar%40yahoo.com>> > wrote: > > From: Steve <stevebdar@yahoo.com <stevebdar%40yahoo.com>> > Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a > Doepfer 9U Case > To: Doepfer_a100@yahoogroups.com <Doepfer_a100%40yahoogroups.com> > Date: Tuesday, February 23, 2010, 12:08 AM > > > > > Ok Thanks...I will get some adapters. > > > > I also have a Analogue Solutions SQ8. The ribbon and connector look the > same as the doepfers I am putting in. Can that work in the case? > > > > > > Cheers, > > > > Steve B > > --- On Mon, 2/22/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote: > > From: Bakis Sirros <synth_freak_ 2000@yahoo. com> > > Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a > Doepfer 9U Case > > To: Doepfer_a100@ yahoogroups. com > > Date: Monday, February 22, 2010, 2:41 PM > > > > hi Steve, > > no. > > Analogue systems modules have different connectors! > > you can buy special connectors to connect ASystems modules to a doepfer > case from analogue systems (or analogue haven, i think): > > thanks, > > Bakis. > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > www. myspace. com/ parallelworldsmusic > > www. myspace. com/ interconnectedmusic > > www. myspace. com/ memorygeist > > www. DiN. org. uk > > www. musicamaximamagneti ca. com > > www. vu-us. com > > www. shimarecords. co. uk > > --- On Mon, 2/22/10, Steve <stevebdar@yahoo. com> wrote: > > From: Steve <stevebdar@yahoo. com> > > Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a > Doepfer 9U Case > > To: Doepfer_a100@ yahoogroups. com > > Date: Monday, February 22, 2010, 10:31 PM > > > > Hi Bakis: > > > > Would the same apply to an ASys RS50 and RS60? > > > > > > Thanks > > > > > > Steve B > > --- On Sat, 2/13/10, Bakis Sirros <synth_freak_ 2000@yahoo. com> wrote: > > From: Bakis Sirros <synth_freak_ 2000@yahoo. com> > > Subject: Re: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a > Doepfer 9U Case > > To: Doepfer_a100@ yahoogroups. com > > Date: Saturday, February 13, 2010, 2:57 AM > > > > hi Steve, > > Plan B modules use the standard doepfer type ribbon power cable. > > just make sure that the red stripe goes to -12volts on both the busboard > and on the module PCB ends. > > thanks, > > Bakis. > > Bakis Sirros - Parallel Worlds / Interconnected / Memory Geist > > [Doepfer_a100] group owner > > www. parallel - worlds - music. com > > www. myspace. com/ parallelworldsmusic > > www. myspace. com/ interconnectedmusic > > www. myspace. com/ memorygeist > > www. DiN. org. uk > > www. musicamaximamagneti ca. com > > www. vu-us. com > > www. shimarecords. co. uk > > --- On Sat, 2/13/10, stevebdar <stevebdar@yahoo. com> wrote: > > From: stevebdar <stevebdar@yahoo. com> > > Subject: [Doepfer_a100] Newbie Question: Adding a Plan B M17 to a Doepfer > 9U Case > > To: Doepfer_a100@ yahoogroups. com > > Date: Saturday, February 13, 2010, 6:46 AM > > > > I've been buying modules (always looking) for my new modular set-up which > will be housed in a Doepfer a-100lc9 9U case. > > My question is about adding a Plan 9 M17 to this case. Will it connect to > the bus like a standard Doepfer module or will I need a special ribbon cable > and connector? > > Thanks > > Steve B > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > [Non-text portions of this message have been removed] > > > [Non-text portions of this message have been removed]