Doepfer

Hi there,

at Muffs the following quote from Dieter catched my eye:

---Quote from Dieter---
the upper and lower bars of the A-100 suitcases have no function. Our
manufacturer told us that they are necessary for the case building 
because
of the rivets that are used to hold the profiles and mounting angles.

You may install your multiples into these bars if you have the 
mechanical
skills to do this job.

We already had suitcases available at the Musikmesse 2009 with multiples
(A-180) and attenuators (A-183) built into the lower bar. But the 
interest
was very poor (it took 6 month to sell the prototype of the case) and 
that's
why we do not offer this case type.
---Quote from Dieter---

Source topic:
http://www.muffwiggler.com/forum/viewtopic.php?p=186592#186592

Is there a picture of this prototype somewhere?

I have to admit that I haven't noticed it and I can't believe this got 
no attention
as the ModularWorld case (http://mwmodularworld.blogspot.com/) has a 
very
ugly utility panel with 4 attenuators and 6 4-way multiples and still 
sells.

Cheers
Joachim

> Is there a picture of this prototype somewhere?

Yes: www.doepfer.de/A100P6_with_2_A180.jpg

Best wishes
Dieter Doepfer

i get this:


"Error 404 - Not found

Die angegebene Seite konnte nicht gefunden werden."


yahoo@doepfer.de wrote:
>  
> 
>  > Is there a picture of this prototype somewhere?
> 
> Yes: www.doepfer.de/A100P6_with_2_A180.jpg
> 
> Best wishes
> Dieter Doepfer
> 
> 

-- 
I am using the free version of SPAMfighter.
We are a community of 6 million users fighting spam.
SPAMfighter has removed 1499 of my spam emails to date.
Get the free SPAMfighter here: http://www.spamfighter.com/len

The Professional version does not have this message

> i get this:
>
>
> "Error 404 - Not found
>
> Die angegebene Seite konnte nicht gefunden werden."

Sorry - it has been deleted apparently as it is a dead link in the meantime
(i.e. no other page of our website includes as link to the picture). I have
transferred it again manually to our website.

Dieter Doepfer

I just went there and it worked for me - no problems. I just posted it to the Photos section of the Yahoo Group.
-James

On Mar 13, 2010, at 8:36 AM, yahoo@doepfer.de wrote:

>> i get this:
>> 
>> 
>> "Error 404 - Not found
>> 
>> Die angegebene Seite konnte nicht gefunden werden."
> 
> Sorry - it has been deleted apparently as it is a dead link in the meantime
> (i.e. no other page of our website includes as link to the picture). I have
> transferred it again manually to our website.
> 
> Dieter Doepfer
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>

Hi,

thanks for making the picture available again.
I think it looks quite good although the labels are missing.
Looks way better than the MW case version.

Personally I would prefer a version with a 2 x 4 Multiple
(my A-180s were 1 x 8 by default) and a A-183-1, both with labelling.

But my favourite case would be a A-100PMS9 as I already have
a A-100PMB and three A-100P6.

The A-100PMS9 should then have 2 x 2x4 Multiples and 2 A-183-1
spaced evenly  on the lower 'bar'.
I would then sell one A-100P6, get  this A-100PMS9 and put the
remaining A-100P6s on top of it, hoping the construction would be 
stable enough.

Would be nice to know if other people would like to have such a 
modified A-100PMS9, too.

Cheers
Joachim

Am 13.03.2010 um 13:50 schrieb <yahoo@doepfer.de>:

>> Is there a picture of this prototype somewhere?
>
> Yes: www.doepfer.de/A100P6_with_2_A180.jpg
>
> Best wishes
> Dieter Doepfer
>
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
>
>

> Hi,
>
> thanks for making the picture available again.
> I think it looks quite good although the labels are missing.
> Looks way better than the MW case version.
>
> Personally I would prefer a version with a 2 x 4 Multiple
> (my A-180s were 1 x 8 by default) and a A-183-1, both with labelling.
>
> But my favourite case would be a A-100PMS9 as I already have
> a A-100PMB and three A-100P6.
>
> The A-100PMS9 should then have 2 x 2x4 Multiples and 2 A-183-1
> spaced evenly  on the lower 'bar'.
> I would then sell one A-100P6, get  this A-100PMS9 and put the
> remaining A-100P6s on top of it, hoping the construction would be
> stable enough.
>
> Would be nice to know if other people would like to have such a
> modified A-100PMS9, too.
>
> Cheers
> Joachim

As already said: the inquiries are very poor and I don't think we will offer
this type of suitcases. It would be not problem to manufacture the suitcases
with additonal A-180 and/or A-183-1 (the additional charges will be about
the same as the A-180 and A-183-1). But if nobody is interested (OK, one
person is interested) it does not make sense ...

Best wishes
Dieter Doepfer