Synth-DIY Yahoo! Groups Archives

Thread

Creating a 10v gate/trigger

2011-03-16 by john m

Hey guys,
Any idea how I can convert a 5v gate singal into a 10v gate signal?
(using standard deopfer modules)
It's to trigger the accent input on asolutions drum modules.

Cheers John.

AW: [Doepfer_a100] Creating a 10v gate/trigger

2011-03-16 by yahoo@doepfer.de

> Hey guys,
> Any idea how I can convert a 5v gate singal into a 10v gate signal?
> (using standard deopfer modules)
> It's to trigger the accent input on asolutions drum modules.
>
> Cheers John.

I think the simplest way is the amplifier module A-183-3: switch = position
2, level control = fully CW

Best wishes
Dieter Doepfer

Re: [Doepfer_a100] Creating a 10v gate/trigger

2011-03-16 by Giorgio

you can make a voltage doubler fairly simply, google it



On Mar 16, 2011, at 7:26 AM, "john m" <jmaddocks1975@yahoo.co.uk> wrote:

> Hey guys,
> Any idea how I can convert a 5v gate singal into a 10v gate signal?
> (using standard deopfer modules)
> It's to trigger the accent input on asolutions drum modules.
> 
> Cheers John.
> 
> 


[Non-text portions of this message have been removed]