Yahoo Groups archive
Thread
2011-10-17 by thomas_escure
Hello everyone, I would like to know if the trigger sequencer module is going to be released one day. I really hope so ! In my opinion there still aren't enough sequencer modules in the Eurorack Modular world... Regards, Thomas
2011-10-17 by NetPierre
I am with you on that Thomas. They showed the A-157 prototype a long time ago, but i haven't seen any info or what feedback they got anywhere. It isn't even mentioned on the Doepfer Future Models page. What i could find is what i wrote in this blogpost: http://patchpierre.blogspot.com/2011/02/most-wanted-iv-157-8x16-step-trigger.html I am looking forward to it's release and am secretly hoping they will release that module together with some Doepfer A-100 drum-modules... :-) Or am I the only one looking forward to Doepfer A-100 drum-modules btw.( A-117-2, A117-3 etc. ,together with the introduction of the new knobs?) I don't want to spam my site too much (sorry Bakis) but something like this : http://patchpierre.blogspot.com/2010/11/most-wanted-ii-drum-modules.html Do we need / can we have a poll on this perhaps? I wonder what Dieter's view on this is. Greetings, Pierre Serné / PatchPierre / NetPierre --- In Doepfer_a100@yahoogroups.com, "thomas_escure" <thomas_escure@...> wrote:
> > Hello everyone, > > I would like to know if the trigger sequencer module is going to be released one day. I really hope so ! > In my opinion there still aren't enough sequencer modules in the Eurorack Modular world... > > Regards, > Thomas >
2011-10-17 by NetPierre
It was just my personal request, there are no drum-modules announced by Doepfer (so far ) Pierre / PatchPierre / NetPierre --- In Doepfer_a100@yahoogroups.com, Zoë Blade <zoe@...> wrote:
> > > Or am I the only one looking forward to Doepfer A-100 drum-modules btw.( A-117-2, A117-3 etc. ,together with the introduction of the new knobs?) > > Is this just a request, or has there been an announcement or prototype or something? I'm always trying to get more TR-808 / TR-909 style sounds. So far there's the Concussor set from Analogue Solutions, plus coming soon are some modules from Tiptop Audio, as well as Din Sync's Drumdokta. It'd be great if Doepfer made something along these lines too, but I'm not sure if there's enough of a market to warrant such an endeavour? > > All the best, > Zoe. >
2011-10-17 by Zoë Blade
> Or am I the only one looking forward to Doepfer A-100 drum-modules btw.( A-117-2, A117-3 etc. ,together with the introduction of the new knobs?) Is this just a request, or has there been an announcement or prototype or something? I'm always trying to get more TR-808 / TR-909 style sounds. So far there's the Concussor set from Analogue Solutions, plus coming soon are some modules from Tiptop Audio, as well as Din Sync's Drumdokta. It'd be great if Doepfer made something along these lines too, but I'm not sure if there's enough of a market to warrant such an endeavour? All the best, Zoe.
2011-10-17 by yahoo@doepfer.de
> -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von thomas_escure > Gesendet: Montag, 17. Oktober 2011 16:21 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Trigger sequencer > > > Hello everyone, > > I would like to know if the trigger sequencer module is going to > be released one day. I really hope so ! > In my opinion there still aren't enough sequencer modules in the > Eurorack Modular world... > > Regards, > Thomas It will definitely come ! At present we are waiting for the new pcb prototype with 16 x 8 buttons and LEDs. Our first plan to use two pc board with 8x8 buttons and LEDs did not work because this would cause a gap between the steps 8 and 9 because of the space required for the pcb connectors. Our plan is to separate the 16x8 button/LED board from the control unit as it seems that there are two groups of users: those who vote for a simple, easy to use (and soon available) version and those for a "sophisticated" version with additional features (probably with LC display to handle all functions). The plan for the simple version is to have only two clock/start/stop inputs available (clock #1 for the units 1-4, clock #2 for 5-8) and a simple memory management (similar to the TR808). For the "sophisticated" version there are plans like independend first/last step for each row, copy and paste functions between rows and memories, right/left shift of complete rows, longer patterns (A, AB, ABCD), maybe intros, fill in's, track programming, more than two clocks and some more. To handle these additional functions probably an LC display and additional buttons will be necessary. But these information is very preliminare. One could use the standard control unit at first and then replace it by the high end version as soon as it is available. Best wishes Dieter Doepfer
2011-10-17 by thomas_escure
Thank you Dieter, that's good news ! I will definitely take the simple module, even with a single clock input and no memory management ! That would be a VERY SIMPLE version. But maybe for the simple version people still want more possibilities... As far as I'm concerned I always prefer simpler modules that can be combined to make things more complicated (the common modular way of thinking, I think) but I'm not the only customer ! Anyway, thank you very much. Regards, Thomas --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
> > > -----Ursprüngliche Nachricht----- > > Von: Doepfer_a100@yahoogroups.com > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von thomas_escure > > Gesendet: Montag, 17. Oktober 2011 16:21 > > An: Doepfer_a100@yahoogroups.com > > Betreff: [Doepfer_a100] Trigger sequencer > > > > > > Hello everyone, > > > > I would like to know if the trigger sequencer module is going to > > be released one day. I really hope so ! > > In my opinion there still aren't enough sequencer modules in the > > Eurorack Modular world... > > > > Regards, > > Thomas > > It will definitely come ! At present we are waiting for the new pcb > prototype with 16 x 8 buttons and LEDs. Our first plan to use two pc board > with 8x8 buttons and LEDs did not work because this would cause a gap > between the steps 8 and 9 because of the space required for the pcb > connectors. Our plan is to separate the 16x8 button/LED board from the > control unit as it seems that there are two groups of users: those who vote > for a simple, easy to use (and soon available) version and those for a > "sophisticated" version with additional features (probably with LC display > to handle all functions). The plan for the simple version is to have only > two clock/start/stop inputs available (clock #1 for the units 1-4, clock #2 > for 5-8) and a simple memory management (similar to the TR808). For the > "sophisticated" version there are plans like independend first/last step for > each row, copy and paste functions between rows and memories, right/left > shift of complete rows, longer patterns (A, AB, ABCD), maybe intros, fill > in's, track programming, more than two clocks and some more. To handle these > additional functions probably an LC display and additional buttons will be > necessary. But these information is very preliminare. One could use the > standard control unit at first and then replace it by the high end version > as soon as it is available. > > Best wishes > Dieter Doepfer >
2011-10-17 by Bakis Sirros
good news! i have been waiting for that module too! Bakis ________________________________
From: "yahoo@doepfer.de" <yahoo@doepfer.de> To: Doepfer_a100@yahoogroups.com Sent: Monday, October 17, 2011 6:22 PM Subject: AW: [Doepfer_a100] Trigger sequencer > -----Ursprüngliche Nachricht----- > Von: Doepfer_a100@yahoogroups.com > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von thomas_escure > Gesendet: Montag, 17. Oktober 2011 16:21 > An: Doepfer_a100@yahoogroups.com > Betreff: [Doepfer_a100] Trigger sequencer > > > Hello everyone, > > I would like to know if the trigger sequencer module is going to > be released one day. I really hope so ! > In my opinion there still aren't enough sequencer modules in the > Eurorack Modular world... > > Regards, > Thomas It will definitely come ! At present we are waiting for the new pcb prototype with 16 x 8 buttons and LEDs. Our first plan to use two pc board with 8x8 buttons and LEDs did not work because this would cause a gap between the steps 8 and 9 because of the space required for the pcb connectors. Our plan is to separate the 16x8 button/LED board from the control unit as it seems that there are two groups of users: those who vote for a simple, easy to use (and soon available) version and those for a "sophisticated" version with additional features (probably with LC display to handle all functions). The plan for the simple version is to have only two clock/start/stop inputs available (clock #1 for the units 1-4, clock #2 for 5-8) and a simple memory management (similar to the TR808). For the "sophisticated" version there are plans like independend first/last step for each row, copy and paste functions between rows and memories, right/left shift of complete rows, longer patterns (A, AB, ABCD), maybe intros, fill in's, track programming, more than two clocks and some more. To handle these additional functions probably an LC display and additional buttons will be necessary. But these information is very preliminare. One could use the standard control unit at first and then replace it by the high end version as soon as it is available. Best wishes Dieter Doepfer [Non-text portions of this message have been removed]
2011-10-23 by jakobsweb
OMG - I had no idea something like this being planned. What a great addition to the A-100 system! The 'sophisticated' version sounds mindblowing and makes me think in the direction of Yamaha's Tenori-on. I simply can't wait for the release of the sophisticated A-157 - consider 1 unit pre-ordered Dieter :-) best regards Jakob --- In Doepfer_a100@yahoogroups.com, <yahoo@...> wrote:
> > > -----Ursprüngliche Nachricht----- > > Von: Doepfer_a100@yahoogroups.com > > [mailto:Doepfer_a100@yahoogroups.com]Im Auftrag von thomas_escure > > Gesendet: Montag, 17. Oktober 2011 16:21 > > An: Doepfer_a100@yahoogroups.com > > Betreff: [Doepfer_a100] Trigger sequencer > > > > > > Hello everyone, > > > > I would like to know if the trigger sequencer module is going to > > be released one day. I really hope so ! > > In my opinion there still aren't enough sequencer modules in the > > Eurorack Modular world... > > > > Regards, > > Thomas > > It will definitely come ! At present we are waiting for the new pcb > prototype with 16 x 8 buttons and LEDs. Our first plan to use two pc board > with 8x8 buttons and LEDs did not work because this would cause a gap > between the steps 8 and 9 because of the space required for the pcb > connectors. Our plan is to separate the 16x8 button/LED board from the > control unit as it seems that there are two groups of users: those who vote > for a simple, easy to use (and soon available) version and those for a > "sophisticated" version with additional features (probably with LC display > to handle all functions). The plan for the simple version is to have only > two clock/start/stop inputs available (clock #1 for the units 1-4, clock #2 > for 5-8) and a simple memory management (similar to the TR808). For the > "sophisticated" version there are plans like independend first/last step for > each row, copy and paste functions between rows and memories, right/left > shift of complete rows, longer patterns (A, AB, ABCD), maybe intros, fill > in's, track programming, more than two clocks and some more. To handle these > additional functions probably an LC display and additional buttons will be > necessary. But these information is very preliminare. One could use the > standard control unit at first and then replace it by the high end version > as soon as it is available. > > Best wishes > Dieter Doepfer >