Doepfer

Hello,

First post here; to start with: thanks Mr. Döpfer for the great
instruments.
I have a Korg MS10, Dark Energy and a small Doepfer case (full) at the
moment, but I will be expanding into 6u very soon. I could very well use
all of the "no jumper" outputs of DE as mentioned in the technical
documentation (LFO's, VCO lin FM etc). As I understand from
this<http://www.glitched.org/up/modifying-the-doepfer-dark-energy-lfo2-cv-out/>
and
other posts, it should not be too difficult. Is there anything I should be
aware of, except voiding the guarantee?

Thanks in advance, best regards,

Martin


[Non-text portions of this message have been removed]

> Hello,
>
> First post here; to start with: thanks Mr. Döpfer for the great
instruments.
> I have a Korg MS10, Dark Energy and a small Doepfer case (full) at the
> moment, but I will be expanding into 6u very soon. I could very well use
> all of the "no jumper" outputs of DE as mentioned in the technical
> documentation (LFO's, VCO lin FM etc). As I understand from
>
this<http://www.glitched.org/up/modifying-the-doepfer-dark-energy-lfo2-cv-ou
t/>
> and other posts, it should not be too difficult. Is there anything I
should be
> aware of, except voiding the guarantee?
>
> Thanks in advance, best regards,
>
> Martin

All additional outputs should be equipped with serial protection resistors
(e.g. 220 Ohm) to avoid the damage of the Dark Energy circuitry in case of a
short circuit made at the output.

Best wishes
Dieter Doepfer

Thank you!
Cheers,
Martin


On Fri, May 24, 2013 at 9:13 AM, <yahoo@doepfer.de> wrote:

> **
>
>
> > Hello,
> >
> > First post here; to start with: thanks Mr. D�pfer for the great
> instruments.
> > I have a Korg MS10, Dark Energy and a small Doepfer case (full) at the
> > moment, but I will be expanding into 6u very soon. I could very well use
> > all of the "no jumper" outputs of DE as mentioned in the technical
> > documentation (LFO's, VCO lin FM etc). As I understand from
> >
> this<
> http://www.glitched.org/up/modifying-the-doepfer-dark-energy-lfo2-cv-ou
> t/>
>
> > and other posts, it should not be too difficult. Is there anything I
> should be
> > aware of, except voiding the guarantee?
> >
> > Thanks in advance, best regards,
> >
> > Martin
>
> All additional outputs should be equipped with serial protection resistors
> (e.g. 220 Ohm) to avoid the damage of the Dark Energy circuitry in case of
> a
> short circuit made at the output.
>
> Best wishes
> Dieter Doepfer
>
>  
>


[Non-text portions of this message have been removed]

many thanks for that from me also!

It's so rare to get such advice from manufacturer.


Andy Butler

yahoo@doepfer.de wrote:

> All additional outputs should be equipped with serial protection resistors
> (e.g. 220 Ohm) to avoid the damage of the Dark Energy circuitry in case of a
> short circuit made at the output.
> 
> Best wishes
> Dieter Doepfer