Doepfer

I�ve also noticed this phenomena, i thought it was a malfunction when i first tried it, but even stranger is that the rate pot. seems to be working in the opposite direction...?..

///dnfn\\\


> Doepfer_a100@yahoogroups.com davevosh@aol.comDate: Sat, 8 Dec 2001 18:23:51 EST
> Re: [Doepfer_a100] Is my A-118 malfunctioning?Reply-To: Doepfer_a100@yahoogroups.com
>
>In a message dated 12/8/2001 5:17:56 PM Eastern Standard Time, 
>keld.soerensen1@skolekom.dk writes:
>
>
>> I was looking at the output of the random output from the A-118 noise 
>> module on an oscilloscope as I noticed that turningthe "red pot" had 
>> an effect on the waveform. Is this supposed to happen? -I thought 
>> that the random out was independent from the other two outs.
>> 
>
>
>
>keld,
>it points out somewhere in the "man pages" for the module that the noise 
>level controls interact with the r.v. output.
>best,
>dave
>
> 
>
>
>[Non-text portions of this message have been removed]
>
>
>
>To unsubscribe from this group, send an email to:
>doepfer_a100-unsubscribe@yahoogroups.com
>
> 
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/ 


------------------------------------------------------------
wood.  fire.  hand.  go.  http://www.bullseyeart.com

Dieter just wrote to me that it is normal -it´s supposed to work that 
way. You can disconnect the colored noise and connect the white noise 
if you want to. Thereby eliminating the influence of the red and blue 
pot.

Keld
--- In Doepfer_a100@y..., "martin olson" <martin@t...> wrote:
> 
> I´ve also noticed this phenomena, i thought it was a malfunction 
when i first tried it, but even stranger is that the rate pot. seems 
to be working in the opposite direction...?..
> 
> ///dnfn\\\
> 
> 
> > Doepfer_a100@y... davevosh@a...: Sat, 8 Dec 2001 18:23:51 EST
> > Re: [Doepfer_a100] Is my A-118 malfunctioning?Reply-To: 
Doepfer_a100@y...
> >
> >In a message dated 12/8/2001 5:17:56 PM Eastern Standard Time, 
> >keld.soerensen1@s... writes:
> >
> >
> >> I was looking at the output of the random output from the A-118 
noise 
> >> module on an oscilloscope as I noticed that turningthe "red pot" 
had 
> >> an effect on the waveform. Is this supposed to happen? -I 
thought 
> >> that the random out was independent from the other two outs.
> >> 
> >
> >
> >
> >keld,
> >it points out somewhere in the "man pages" for the module that the 
noise 
> >level controls interact with the r.v. output.
> >best,
> >dave
> >
> > 
> >
> >
> >[Non-text portions of this message have been removed]
> >
> >
> >
> >To unsubscribe from this group, send an email to:
> >doepfer_a100-unsubscribe@y...
> >
> > 
> >
> >Your use of Yahoo! Groups is subject to 
http://docs.yahoo.com/info/terms/ 

> 
> 
> ------------------------------------------------------------
> wood.  fire.  hand.  go.  http://www.bullseyeart.com