Doepfer

I am confused! 

Please could a kind soul clarify that a Darktime will control an MS20
via the cv outputs provided I use the s -trigger cable from Doepfer for gate trigger

I plan to use the Darktime's upper row for pitch and the lower row for VcF cut-off modulation on the MS20

Hello

On 27.01.14 22:02 , draks@apollo111.demon.co.uk wrote:
> Please could a kind soul clarify that a Darktime will control an MS20
> via the cv outputs provided I use the s -trigger cable from Doepfer for gate trigger
>
> I plan to use the Darktime's upper row for pitch and the lower row for VcF cut-off modulation on the MS20

You may read http://www.doepfer.de/faq/ms2010__faq.htm

Florian

> I am confused!
>
> Please could a kind soul clarify that a Darktime will control an MS20
> via the cv outputs provided I use the s -trigger cable from
> Doepfer for gate trigger
>
> I plan to use the Darktime's upper row for pitch and the lower
> row for VcF cut-off modulation on the MS20

Please refer to the FAQ page of our website:

www.doepfer.com > FAQ > General > Controlling Korg MS20 with Volt/Octave
devices (e.g. MCV4, MCV24, MAQ16/3, Dark Time, Dark Link)

Best wishes
Dieter Doepfer