Doepfer

DIETER DOEPFER:
"At present it is too early to give statements concerning the max. 
speed of the
A-154. It depends upon the power and the software of the 
microcontroller used in
the A-154. And this can be measured not before the first prototype is 
available
and the first software is running."

"The A-154 will be a sequencer controller but not a grafic vco 
controller. And I
don't think that the additional A-154 features are necessary for 
grafic vco
applications. But if possible of course we will try to unclude fast 
audio
clocks. But we are not planning that the internal clock of the A-154 
reaches the
audio range but max about 100 Hz."

"I hope that we will have available prototypes of the A-154 and A-107 
for the
NAMM show in January. Then we will decide if it is necessary to 
improvements or
correct the prototype designs. So I hope that the first A-154 and A-
107 will be
available about sprint 2003 (it takes still about 3 months to obtain 
the first
modules from our manufacturer as soon as we finished the development).

Yesterday(26-11-2002) we received the cases for the A-198 manuals and 
Roland Mayer starts
today to built the first A-198 manuals (the A-198 modules are still 
available).
So I hope the first A-198 will be shipped end of this week (user's 
manual is not
yet written).

The A-102 and A-109 are in production and I hope that they will be 
available
middle of December provided that our manufacturer keeps his promise."
Best  wishes
Dieter Doepfer

--- In Doepfer_a100@y..., "synth_freak_2000" <synth_freak_2000@y...> 
wrote:
> DIETER DOEPFER:
> "The A-154 will be a sequencer controller but not a grafic vco 
> controller. And I
> don't think that the additional A-154 features are necessary for 
> grafic vco
> applications. But if possible of course we will try to unclude fast 
> audio
> clocks. But we are not planning that the internal clock of the A-
154 
> reaches the
> audio range but max about 100 Hz."


would it be too much for it to go up to 1000hz or 2000hz.

what would be its lowest cycle?

regards,
RM

hi ringmod,
i really think that the issue here is to make the a154
control section be able to reach audio freqs!!!a
graphic vco(a155) with random running mode or vc
addressable steps would be awesome!this way you could
have a vco with ever changing waveform!so,i really
think that doepfer would HAVE to make the a154 control
section to run in audio freqs too!!!!just like the
older a155's!!!
if they don't do that,we'll have to buy fewer a154's
and leave some of our a155's without their a154
companion.this will be the only way to make them
capable of functioning as sequencers as well as
graphic vco's,too...
(message will be forwarded to doepfer,of course...)
bakis.



--- ringmod45 <ringmod45@yahoo.com> wrote:
> --- In Doepfer_a100@y..., "synth_freak_2000"
> <synth_freak_2000@y...> 
> wrote:
> > DIETER DOEPFER:
> > "The A-154 will be a sequencer controller but not
> a grafic vco 
> > controller. And I
> > don't think that the additional A-154 features are
> necessary for 
> > grafic vco
> > applications. But if possible of course we will
> try to unclude fast 
> > audio
> > clocks. But we are not planning that the internal
> clock of the A-
> 154 
> > reaches the
> > audio range but max about 100 Hz."
> 
> 
> would it be too much for it to go up to 1000hz or
> 2000hz.
> 
> what would be its lowest cycle?
> 
> regards,
> RM
> 
> 
> 
> 


=====
synthfreak(parallel worlds)
athens-greece
[Doepfer_a100] group owner-moderator

__________________________________________________
Do you Yahoo!?
Yahoo! Mail Plus - Powerful. Affordable. Sign up now.
http://mailplus.yahoo.com